by www.consumertronics.net
P. O. Box 23097, Albuquerque, NM 87192
Click => HOW TO ORDER, read, then Hit Browser Back-Button to return here
Check, Money Order, PayPal (see below), Money Transfer Services (MTS), Trade
2017 Catalog Webpages now on 1G Flash Drive (only $19.95)

Welcome to ABQ Techzonics, Albuquerque, NM! (high tech devices,hardware,equipment,components,parts,special materials,books,manuals,ebooks,software,collectibles,antiques, part of Consumertronics.net)

ABQ Techzonics
Albuquerque, NM

Sitemap

ABQ Techzonics rules! (high tech devices,hardware,equipment,parts,components,special materials,books,ebooks,manuals,software,antiques,collectibles, part of Consumertronics.net)
Techzonics Email:
wizguru



...tell your friends!

policies.htm
USA site - No cookies - No spyware - No adware - No trojans - No viruses - No worms - No spam - No pop-ups
We Respect Your Privacy - We do NOT Monitor Your Shopping nor Track You Online, nor Share Your Data

ABQ Techzonics Earthshaking Online Tech Superstore
We Seriously Consider all Reasonable Best Offers, Price Negotiations, Trade Offers!
We are Your Perfect One-Stop-Shopping Superstore to Fill Your High-Tech Parts Lists!

POWER TOOLS, ELECTRIC TOOLS, MACHINE TOOLS, DREMEL TOOLS:
Power Tools, Machine Shop Tools, other Electric Tools / Pneumatic Tools, Gas-Powered Tools (Gas Tools), Solar-Powered Tools (Solar Tools), Vintage Electric Tools, Dremel Tools, Laser Tools, Collectible Electric Tools, Electric Tool Collections, Power Tool Accessories, Bits, Blades and Belts

Our Great Handtools / Manual Tools Pages:
CRAFTS, ARTS, HOBBIES, TOYS, MODEL-MAKING, SPORTS, ENTERTAINMENT, MUSIC TOOLS, PARTS, MATERIALS
MECHANICS TOOLS, MACHINISTS TOOLS, SHOP TOOLS, VEHICLE TOOLS, etc.
VISES / VICES, CLAMPS, TOOL HOLDERS, WORK HOLDERS, PRESSES, GRIPPERS, POSITIONERS, etc.
OTHER TRADES: PLUMBERS, CARPENTERS, APPLIANCES, WELDING, FORGE, HVAC, BUILDING, etc.
PROFESSIONAL: ELECTRONICS, ELECTRICAL, COMPUTER, DENTAL, MEDICAL, OFFICE, WATCH, JEWELRY,etc.
MISCELLANEOUS: RESTAURANT, KITCHEN, TOOL BOXES, TOOL CONTAINERS, TOOL COLLECTIONS, etc.

MECHANICAL HARDWARE: (NON-FASTENER PARTS), CAR PARTS, etc.
MECHANICAL FASTENERS: NUTS, BOLTS, SCREWS, NAILS, CLIPS, etc.
SPECIAL MATERIALS: RAW MATERIALS, PROCESSED MATERIALS, SHOP STOCK, SUPPLIES, etc.

Our Great Power Tools / Electrical Tools / Electronic Tools Pages:
Power Tools, Electric Tools, Machine Tools, Dremel Tools
- (this page)
Electronic Test Equipment, Electrical Test Equipment, Meters

POWER TOOLS / ELECTRIC TOOLS CATEGORIES
(Most Tools fit multiple Tool Categories - please check all applicable Categories, or use Search Box on top right)

MECHANICAL TOOLS / ELECTRIC TOOLS: Mechanics Tools, Machine Shop Tools.
VEHICLE POWER TOOLS / ELECTRIC TOOLS: Auto Shop Tools, Truck Tools, Aircraft Tools, Boat Tools, Motorcycle Tools, Bicycle Tools, Dolly and Cart Tools.
OTHER TRADES POWER TOOLS / ELECTRIC TOOLS: Carpenter Tools, Plumbers Tools, Appliance Repair Tools, Sheetmetal Tools, Welding Shop Tools, HVAC Tools, Builder Tools, Construction Tools, Furniture Tools / Upholstery Tools, Landscaping Tools, Farming Tools, Gardening Tools, Ranching Tools, Tree Tools.
ELECTRICIAN & ELECTRONIC POWER TOOLS / ELECTRIC TOOLS: Electronic Tools, Electrical Tools, Electrician Tools, Computer Tools, TV Shop Tools, Cable Tools, Laser Tools, Robotics Tools, Technician Tools.
OTHER PROFESSIONAL POWER TOOLS / ELECTRIC TOOLS: Precision Tools, Laboratory Tools, Office Tools, Locksmith Tools, Drafting Tools, Photography Tools, Jeweler Tools, Watchmaker Tools, Medical- /Dental-type Tools, Beauty Shop Tools, Shoe Shop Tools, Geology Tools, Archaeology Tools, Paleontology Tools, Astronomy Tools.
ACTIVITY POWER TOOLS / ELECTRIC TOOLS: Dremel Tools, Crafts Tools, Hobby Tools, Model-Making Tools, Sports Tools, Gun Shop Tools, Music Tools.

FOOD POWER TOOLS / ELECTRIC TOOLS: Restaurant Tools, Kitchen Tools, Barbeque Tools.

YOUR ONLINE ONE-STOP SHOPPING TECH SUPERSTORE!

SEE OUR SUPERSTORE webpages FOR: ELECTRONIC COMPONENTS / ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Crystals, Oscillators, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, Power, other Electronic Parts / Electronic Components. EQUIPMENT: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Tool Chests, Vehicles (Cars, Trucks, Bikes). MORE TECH STUFF: Scientific/Industrial Valves, Fittings, Personal Security, Survival (Survivalists / Preppers), Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Collectibles - Hardware, Devices, Parts, Special Materials, Books, Manuals, Software

Links to all Offer Webpages => SITEMAP <= => ABQ TECHZONICS <= Homepage

Consumertronics.net, P. O. Box 23097, Albuquerque, NM 87192

Contact: wizguru@consumertronics.net
Voice: 505-321-1034 (9-5 MST, M-F)
Please EMAIL US for all Orders, Inquiries and Questions

Copyright © 2008-2017, Consumertronics. All rights reserved

SEARCHING FOR ITEMS: Items are enterred in this webpage mostly based on order we obtain them. Please use top-right search box or your Browser Search / Find feature to locate the specific Items of interest or just browse webpage. We listed many Items by more than one name and name variation (e.g. "power drill", "electric drill"). If you can't find Item on webpage, try by other name variations, and then by function and functional variations, then search our other likely webpages, see SITEMAP for links.

ITEM CONDITIONS: Unless otherwise indicated, all items described on this webpage are new old stock (NOS) and never used. We often buy and trade for new electronic parts, electronic test equipment, and other items of the types described herein, preferably in larger quantities, some which we set aside for our own electronic laboratory, shop and other inventories and some we resell herein. Should you have items to sell or trade of these types, please let us know via email. All small parts and materials we acquire for resale herein must be new, but we often buy and trade for used large parts, tools, equipment and books in very good conditions, which we describe as "used" for those we resell. Please email us (please don't call as we are often in our labs), use email Subject: "Buy/Sell/Trade Inquiry."

DESCRIPTIONS & IMAGES: Unlike many Online stores, our goal is to always provide you clear and correct item images, and accurate and reasonably complete item descriptions. While we have tried to be 100% accurate in our descriptions and images, please freely let us know of any errors or omissions made herein, for example, by emailing us URLs to relevant datasheets. While images usually help, most of the items we sell are already well known. If any of our descriptions or images are missing, incomplete or inaccurate and this affects your purchase decision, please email us (please don't phone; put "Need Better Info for Item" in email Subject Line) so we can make reasonable corrections. Many of our images of electrical and electronic hardware do not show all of the leads or cabling which the actual items have so that we can provide bigger and clearer images of the body of the items to better show part numbers, labeling, features and cosmetic conditions.

POLICIES: Unless explicitly stated otherwise on this webpage, all applicable policies are found at: www.consumertronics.net/policies.htm.

PAYMENTS: We accept checks, money orders, PayPal (PP), Money Transfer Service (MTS) payment, trade and cash. Simply email us (wizguru) a list of what you want (Title, name or part # of each choice), include the prices with S/H, and your name, shipping address and preferred payment method, or use one of our Consumertronics Online Order Forms. We ship within 2 work days after full payment clearance period from day of deposit. All payments must be made in $US - no Canadian dollars or Australian dollars. Details below:
     (1) FASTEST SHIPPING: U.S. Postal Money Order (PMO), Canadian PMO (made out in $US), PP, MTS and cash are considered to be same-as-cash by us - clearance period is zero days. Note: We are not responsible for cash sent in the mails, so conceal well.
     (2) MOs & CHECKS DETAILS: Pay to: "Consumertronics". ALL NON-PMO MOz & CHECKS : Clearance period: 10+ days if $20-$100, 20+ days if $101-$250, 30+ days if over $250.
     (3) MONEY TRANFER SERVICES (MTS) DETAILS: Pay to: "John J. Williams" (due to fact that using MTS to pay to a business name is usually a major hassle). All MTS payments over $500 require prior written approval by us. While almost all MTS arrive here within an hour, a few may take take days.
     (4) PAYPAL DETAILS: Go to PayPal. Do a PP "Send Money" to: "wizguru@consumertronics.net". PP over $50 require prior, explicit, written approval by us via email, and PP payers must be Verified PP users, which transaction PP must provide Seller Protection. For both verifiable and repeat Buyers, ABQ Techzonics may greatly increase the PP limit, in which case, it emails to Buyer his/her new PP level.
     (5) ITEMS FOR TRADE DETAILS: Who doesn't want to save cash these days! We do accept Items of Trade. By doing Items For Trade, you save money and get rid of good Item(s) you need less than Items we offer. Prior explicit permission from us is required before you ship to us any Item for trade. If interested, email us (wizguru, put in email Subject Line: "Item for Trade Inquiry.") with full details of what you have to offer and what you want for it (you must have sole and exclusive ownership of all Items you offer to us for trade). Include complete description of all Item(s), including Item make and model/part numbers, conditions, quantities, defects. Please do NOT phone us about Items of trade. If interested we will email you back with conditional acceptance or a counteroffer. If mutual acceptance results, we will then email you our permission to ship the Items, which you do at your S/H expense. Once your trade Items arrive here, we will examine them, which usually takes 3-20 days. If acceptable to us, we will ship (at our S/H expense within 2 work days) what we had agree to trade to you. Note: We do not want old TVs,VCRs, home systems, computers, monitors or peripherals or big, heavy items, and all items must be clean and safe to ship and handle. Again, don't ship us anything until you receive our written explicit approval to do so.
     (6) PAY EXACT FULL AMOUNT: Please pay the exact full amount of your purchase + S/H (email us if you are not sure). If you overpay us by more than 5% or $100 (whichever is less), allow 90-120 days for us to refund you the difference.
     (7) UNACCEPTABLE ORDER TYPES: No credit cards, CODs, partial payments, postdated payments, "on approvals" or any other types of payments or shipment not explicitly OKed herein or by us in writing prior to payment. Furthermore, we reserve the right to refuse any order, form of payment, or buyer-imposed sale or shipping conditions without liability to us. For our good buyers: We are more flexible in types of payments and shipping conditions. FOREIGN BUYERS: Some items may be restricted by government regulations for export, and Buyers assume all liability for the legality of our shipments to them and their purchases, possessions and uses of the items we ship to them.

PRICING: We are flexible in our prices and S/H - especially for our good customers and for quantity and multi-item orders - we want to be fair to both you and us. Prices are stated below Item Description. We determined Item price based on prices of similar items found Online and in stores. In cases of no clear Online or store price consensus, other sources were used. If our price is too high for any item we sell, we will seriously consider reducing our price - especially if you document that others are selling this same or equivalent item at lower prices in the quantity you need - our goal is to beat our competitors! For many items, we are not limited to the quantities shown - should you need more and we have what you need available, we will seriously consider your offer. By buying an item in quantity and/or more than one item, you much reduce your S/H costs per unit. In most cases we can also do less quantity if your total order is $10+ (+S/H) and average price of your items is $5+ each. Just email us with your needs, your counter-offers, and/or items you want to trade.

SPECIAL DISCOUNTS: Until ___________, 20___, you may take _______% off of the price of any and all Items described on this webpage in which the word "Firm" does not appear next to the price.

SPECIAL QUANTITY DEALS SAVES YOU MONEY: Larger quantity (and multiple Item and local pickup and delivery) sales almost always result in per-unit $Item-plus-S/H savings for YOU! We have some Items in much larger quantities than offered above as usually stated in Item description. Yes, if we have the quantity to meet your higher quantity needs, we will seriously consider any reasonable and mutually fair offer you propose which will not only get you the quantity you need but at a substantial savings to you in per unit price and per unit S/H costs (quantity evenly divisible by 10 or 25). We will seriously consider underselling all other major sellers of the same items.

SHIPPING & HANDLING: Where S/H is stated, it is stated for CONTINENTAL USA ORDERS. Shipping part of S/H is based on actual Shipping charges. Where S/H is not stated, the following S/H charges apply:

CONTINENTAL USA ORDERS: $5.90.

NON-CONTINENTAL USA ORDERS: $8.90.

FOREIGN ORDERS: Please inquire. Minimum foreign Air Mail S/H is $14.90 Canada, and $22.90 all other foreign addresses, so please order as much as you can to save substantial foreign S/H.

MULTIPLE ITEMS SAVE YOU MUCH S/H CHARGES!: We are your perfect one-stop-shopping Super Store for high-tech parts to fill your parts lists! S/H is now expensive and shippers are constantly increasing their rates; to save YOU much in S/H, please order all that you need from us today from this webpage and all of our other webpages, pay for them all in full in one payment to be shipped all together to same address. ALL USA & CANADA ORDERS: You pay full S/H for your most S/H-costly Item plus half S/H for each and every other Item you buy. ALL OTHER FOREIGN ORDERS: Please inquire.

SHIPPING METHOD: For USA, we usually use Priority Mail or Media Mail (if book or manual) if Shipping charge is less than 75% of the S/H stated above. All foreign Shipping is by Air Mail. Other forms of USA shipping, including UPS, FedEx, Overnight, Second Day Air, Insured, etc. are usually OK but the S/H will be higher. We will not charge shipping to Buyer's shipper account.

ANTISTATIC PACKAGING: All Items which are electrostatically sensitive (e.g. CMOS, FET, MOSFET or otherwise known to be static electricity sensitive) are shipped in antistatic tubes, antistatic foam, antistatic reel tape, antistatic tray, and/or antistatic bag.

LOCAL PICKUP / DELIVERY OPTIONS: To possibly save YOU much S/H money, see: Local Pick-Up-and-Delivery Options.

Thanks for visiting our ABQ Techzonics website. Best of successes. John J. Williams, M.S.E.E., Consumertronics.net

Return to TOOL CATEGORIES

MECHANICAL POWER TOOLS / ELECTRIC TOOLS: Mechanics Tools, Machine Shop Tools:

-
SEARS CRAFTSMAN MODEL 315.273980
3/8" PROFESSIONAL CORDLESS DRILL-DRIVER
Variable Speed & Reversible + Original Case + User Manual

Used and in great condition. Sears Craftsman Model 315.273980 3/8" Professional Cordless Drill-Driver, Variable Speed and Reversible, with Original Case and User Manual (charger not included). Compact and lightweight, and reasonably powerful. Does not include a rechargeable battery. This sturdy plastic drill case fits other cordless drills as well. 18" x 12" x 4-1/2".

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD139. - Price: $29.95. S/H: $14.90.

-
-
-
PROFESSIONAL MINI AIR COMPRESSOR, (Art Air Brush Uses)
COMPRESSOR MOTOR SHOP TOOL, #95630
1/5 HP, 30 PSI, Central Pneumatic
USES: AIRBRUSH, FISH TANKS, MACHINE SHOP BIT/BLADE COOLING
SPRAY PAINTING - MORE!

Used and in very good condition. Professional Mini Air Compressor Tool, Item 95630, 30 PSI, by Central Pneumatic. Motor is 1/5 hp, 1,750 RPM. Many uses include: Airbrushing, Fish Tank Aeration, Spray Painting, Cooling of Bits and Blades on powered tools such as drills, saws, lathes, milling machines. No hose (hoses are pretty cheap).

LIMITED QUANTITY. We have only one of these left to sell.

BUYER: Order by Title (below image) - Email us your order. - List History: LD188. - Price: $29.95, S/H: $9.90, 9.5 lb.

-
-
-
RARE WOLF HOT CUTTER /
WOLF THERMAL CUTTER
ROTARY HOT KNIFE POWER TOOL
HAND HELD INDUSTRIAL GRADE

(Sorry, we have recently sold out of this Item; we are trying to obtain more.) Used and in very good condition. Rare, Industrial Grade Handheld Wolf Hot Cutter / Wolf Thermal Cutter Power Tool. Basically, you place the material to be cut on a table, you draw a line on it that you want to cut along, then you roll the edge of the cutting wheel along your line to cut. Rotary cutting wheel knife is 3" dia. Maximum cutting depth is 3/8". Handle is wood, 5-1/4" long - well-insulated from the heat. No power rating.

CAUTION: This tool has a very sharp circular cutting edge. It also gets very hot - about as hot as a soldering iron. It needs these two features to be able to smoothly cut thru difficult materials at fairly fast rates. This is a very useful and versatile tool when properly used. Because it is sharp and hot, be very careful and all safety precautions when using and storing it. Wear heat-proof gloves, apron, clothes, shoes and hat. Wear protective eyewear. Use only in a dry, sturdy, level and non-conductive environment and surface. Keep out of reach of animals, children and anyone not fully aware of its potential dangers or not competent to safely handle it. Never touch its blade against flesh, hot or cold. Allow to cool completely before storing.

LIMITED QUANTITY. We have only one of these left to sell.

BUYER: Order by Title (below image) - Email us your order. - List History: LD179. - Price: $399.95, S/H: $9.90, 5 lbs.


RARE VINTAGE HAFELE QWIK-SET DRILL JIG

(Sorry, we ran out of this popular Hafele Qwik-Set Drill Jig; we are trying to get more, we will post if and when we do.) Used and in Very Good Condition. Rare, Vintage Hafele Qwik-Set Drill Jig. Owned for years now, but forgot how we used to use this Hafele Qwik-Set Drill Jig.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD153. - Price: $49.95.

SEARS CRAFTSMAN MODEL 1425301
1 HOUR CHARGER, 7.2V - 24V

Used and in great condition. Sears Craftsman Model 1425301 1 Hour Charger, 7.2V - 24V. Charges batteries for many kinds of Sears tools / Craftsman tools. See left-bottom corner of image above (does not include Sears Craftsman Model 315.273980 drill-driver, user manual or case).

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD139. - Price: $14.95. S/H: $9.90. Combined S/H for both the Sears Craftsman drill-driver set and the Sears Craftsman charger, if ordered together, is $19.90.

-
DREMEL TOOL CASE for PRO-SOURCE PC ROTARY TOOL

Used and in very good condition. Rugged plastic Dremel Tool Case, 12" x 9" x 3-3/8". For Pro-Source PC Rotary Tools. Fits many Dremel-type rotary drills, including those with straight, angled and pistol-type handles (we have tried 5 different Dremel-type drills and they all fitted well). The clear plastic container in the bottom has several Dremel bits in it (its lid has cracks but no breaks or chips). Not shown well in the top lid is the indentation to hold a Dremel tool flexible extension.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD139. - Price: $24.95


BOSCH ROTOZIP PA6-GF33 JIG SAW HANDLE KIT

Used and in very good condition. Rotozip Bosc PA6-GF33 Jigsaw Handle Kit. Great for control of Rotozip cutting tools, but also can be adapted for Dremel Tools and other makes of rotary drilling and cutting tools.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD128. - Price: $39.95. S/H: $7.90.


CORDLESS POWER DRILL / PORTABLE POWER DRILL
HAND-TIGHTENED CHUCK, BLACK & DECKER MODEL 9099KC

New. Black & Decker Cordless Drill, Model #9099KC, convenient hand-tightened chuck (no chuck key required). Was bought as part of a large lot, but since we already had much more expensive 18V cordless drill for drilling steel, we have no need for it here.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD128. - Price: $29.95. S/H: $7.90


RARE SUPREME H5T33 DRILL CHUCK, TAPERED ARBOR
+ DRILL CHUCK KEY, 5/64" - 1/2" CAPACITY

Both 1/2" drill chuck and chuck key are used and in great condition. Supreme H5T33 Drill Chuck w/ Drill Chuck Key, 5/64" - 1/2" Capacity, tapered arbor. Heavy-duty ballbearings. We were told that it was a No. 5 Morse taper, and No. 3 Jacobs taper, but we are not certain. Note the through hole near bottom of arbor used to assist in installing and removing the H5T33 chuck.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD121. - Price: $34.95

-
SEARS CRAFTSMAN DRILL STAND HEAD, MODEL #25921

Used, works great. Heavy duty Sears Craftsman drill stand head, Model 25921.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $29.95. S/H: $9.90


SEARS CRAFTSMAN DRILL GUIDE #11233

(Sorry, this great Sears Craftsman Drill Guide, #11233 is no longer available; we are looking for more). New in the box with manual and chuck key. Sears Craftsman drill guide, Model #11233. This is a very high quality drill guide. Chuck is 3/8". Can be precisely set and securely locked in for any angle between 0 degrees and 90 degrees.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $49.95. S/H: $9.90

-
RARE, VINTAGE BLACK & DECKER
DELUXE HORIZONTAL STAND / DRILL STAND

Used and in great condition. Rare Black & Decker Deluxe Horizontal Drill Stand. Made of steel. Great for converting a power drill (or other power tool or motor) into a sturdy horizontal grinder, sander, polisher, drill, saw, cutter, lathe, coil winder, etc. Even if the drill you have is not an exact match, you may be able to find some way to secure it to the stand to make it work. Also great for standing or draping items on its side to work on them or to position them better for taking photographs.

LIMITED QUANTITY. We only have one left.

BUYER: Order by Title (below image) - Email us your order. - List History: LD121. - Price: $34.95. S/H: $10.90.


MANUAL LATHE CENTER HEADSTOCK
WORK HOLDING, MACHINIST TOOL / HOLDER /
JIG / POSITIONER / MACHINIST TOOL, CLAMPS,
VISE: FURNITURE MAKING, CARPENTRY, CRAFTS,
REPAIRS, MODELING, STEEL

Used and works great. Steel lathe-like tool for work centering, holding and positioning, with dual clamps. This manual tool is great for the general shop, carpentry shop, machine shop, auto shop, and for construction workers, plumbers, gunsmiths and blacksmiths. Heavy duty, industrial grade very good quality jig tool and vise. We don't know what exactly this very useful, versatile and portable tool is called, who makes it, or what it is mainly used for (if you do, please freely tell us). Can also be used for many non-lathe shop and construction site uses as a clamp or vise system to securely hold and position anything from stock to odd-shaped objects, such as for hand crafting, carving, shaping, painting, sanding, grinding, drilling, cementing, etc. wood, plastics, metals and ceramics. Especially ideal for crafts, model making, and fabricating Ideal for machine shop, furniture shop, carpentry, crafts, model-making, more.

BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $89.95. S/H: $13.90.


HEAVY STEEL BURR HOLDER / BIT HOLDER / ROD HOLDER

Used and in great condition. This is a heavy steel block with 44 holes drilled in it for holding burrs, bits, rods, etc., 6" x 2" x 1/2". The 11 large holes are 1/4" dia., 33 small holes are 3/16" dia. Steel block is also a very strong and sturdy base for holding work items for painting, sanding, sculpturing, modeling, cementing, etc., and for holding down work. Also serves as a great office heavy paper weight for those times you don't need it for shop use. You can also run bolts, tiewrap ties, wires, rope, etc. through the holes for securing it to something else or other objects to it with these fasteners, etc. These days, most burr holders / bit holders are cheap plastic - this is the real deal!

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD121. - Price: $29.95, $8.90. S/H.


5" DIA. MOTOR STAND, STEEL
w/ SHOCK ABSORBER FEET

This rugged steel motor stand is used and in great condition. Great for horizontal applications, such as to mount motors for horizontal grinders, polishers, sanders, routers, drillers, punches, saws, etc. We are also selling the A.O. Smith variable speed motor, #319P852 BL6414, that the stand was originally used for separately on this website. Can be used for many different makes and models of motors, generators, power tools, other electrical and mechanical apparati, pots and other containers which will fit into it and can be secured by it. For smaller diameter objects, stiff rubber padding can always be cemented onto the inside to reduce the diamter accordingly. The stand permits fast and easy removal and switching of various objects you may want to use with it, depending upon your application at the time. 4" tall. 1/4" bolt holes on the three shock-absorber feet are spaced 10.5" apart from each other.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $39.95. S/H: $9.90


SEARS CRAFTSMAN UNIVERSAL JIG FOR TABLE SAWS

Sears Craftsman Universal Jig for Table Saws 9 3236 (or 93236). Very good functional and cosmetic condition.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $39.95. S/H: $13.90


LATHE / MILLING MACHINE ACCESSORY /
LATHE / MILLING MACHINE FITTING

Really nice lathe or milling machine fitting / accessory. We bought this at an estate sale but was unable to find out what its specific use is. It was resting on a lathe, which was next to a milling machine. It does not have any manufacturing or part number information on it that we can find. Do you know what this does or the specific machines it works with? One customer told us that this item is strictly for a wood lathe, and it is the clamp to hold the tool post that the lathe chisels rest on to turn the wood in the lathe, and that this is from a copy crafter attachment for wood lathes, but we have not been able to verify this. Made of heavy steel with an adjustable aluminum block on the bottom attached to the shaft by means of an "eye" bolt that is apparently used to adjust and secure it to the machine it is used with.

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD098. - Price: $69.95. S/H: $10, 10 lbs


INDUSTRIAL RECIPROCATING POWER TOOL
w/ TABLE TOP / WORK PLATFORM

Used but in good working condition. Made of steel. 10" tall. Table top is 9+" x 9+", and it can tilt up to 10 degrees forwards or backwards. Manufacturer is unknown. No motor. This is heavy duty, industrial grade, and very sturdy and strong power tool stand for just about the toughest jobs in the metal shop, car shop, machine shop, carpentry shop, crafts shop, etc. It utilizes a cam action (bottom left image of 2nd Image) that drives the tool-holding arm up and down at a rate determined by motor speed and power and the load forces from whatever job it does.

This device can be adapted to perform just about any shop function one can imagine that can be done using a reciprocating mechanism (up/down vibrating mechanism), including: Saw, sander, grinder, polisher, shaper, scroller, punch / puncher, reamer, lapidary tool, hammer, swager, pounder, presser, edger, cutter, molder, rammer, scrubber, splitter, cracker, crusher, smasher, pulverizer, buster, breaker, planer, jointer, swager, squeezer, mixer, shears, etc.

Part of what appears to be a clutch assembly is shown in one of the images (bottom right image of 2nd. Image), which can be removed or built upon. We have no other parts associated with it. Does not include a motor or any bits.

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD049, LS092-R12. - Price: $79.95. S/H: $24, 24 lbs


VINTAGE SHOP CRAFT ELECTRIC SCREW DRIVER,
115V, 3A, 60 HZ/50 Hz, MODEL 919511

Used and works great. Shop Craft electric screwdriver, 115 VAC, 3 Amp, 60 Hz, Model 919511. Uses hex bits. We got this great tool at an estate sale. We now have so many electric power screwdrivers that we need to sell some. Especially handy for tight spots where others won't fit.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD094. - Price: $89.95. S/H: $11.90

Return to TOOL CATEGORIES

VEHICLE POWER TOOLS / ELECTRIC TOOLS: Auto Shop Tools, Truck Tools, Aircraft Tools, Boat Tools, Motorcycle Tools, Bicycle Tools, Cart and Dolly Tools:


SISCO 12VDC ELECTRIC TIRE WRENCH /
IMPACT WRENCH, MODEL 1600
w/ SOCKETS, STURDY CASE, MINT CONDITION

Electric power impact wrench is used but in mint condition. While ostensibly designed for safely changing flat tires on the road, this power wrench can be used for many other applications where there is a powered vehicle cigarette lighter socket available. Uses 1/2-inch sockets, of which 4 common sizes that fit wheel lugs are provided (7/8", 13/16", 21mm, 17mm). Therefore, this powerful impact wrench is ideal for road vehicle trips, outdoor activities, and remote jobs.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $39.95. S/H: $7, 7 lbs


PORTABLE 12-VOLT ELECTRIC GRINDER
CHAINSAW SHARPENER CHAIN GRINDER, Oregon

Used and in very good functional condition, but part of cable is missing. Very versatile Oregon Portable 12VDC Electric Grinder, Chainsaw Sharperner Chain Grinder, Omark Industries. Usually powered by a 12VDC car battery. In this model, the faceplate can be easily removed (2 screws), and since this grinder has a Dremel-like chuck, the grinding bit can be easily removed and replaced with another grinding bit, a drill bit, a cutter bit or a polisher, converting this Chain Saw Grinder into a versatile portable grind/polish/drill/cut Dremel-like tool, which you can use in the field and in conjunction with your car or truck directly off of the vehicle battery with no need for an AC outlet.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $19.95, S/H: $7.90.


MULTI QUICK CHARGER, MODEL EXPO, 5N / 6N BATTERIES w/ TIMER

Multi Quick Charger, made by Model Expo. Used and works great. Comes with long (about 10'), heavy duty cable with cigarette lighter plug. Some surface scuffing.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $34.95


HIGH QUALITY BATTERY JUMPER CABLE CLAMPS,
HIGH-CURRENT CLAMPS

New In Box (NIB). Very high quality. Industrial-grade. About twice size as many car battery jumper clamps.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $29.95


RARE, VINTAGE HOYT CELL TESTER,
6V & 12V BATTERY TESTER

Used and works great. Has a built-in load, as shown, so tests cells under actual and realistic battery working conditions. Designed for car batteries and motorcycle batteries, but can be used for other electrical and electronic testing, for example, to test large electrolytic capacitors and powered electrical terminals.

UNIQUE ITEM. We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD099. - Price: $$59.95


VERSATRUE UNIVERSAL FISHFINDER / CHARTPOLOTTER MOUNT

New in the box, Versatrue Universal Fishfinder / Chartplotter Mount stand. Compatible with most fishfinders and chartplotters from Garmin, Eagle, Lowrance and RayMarine. This mount is also so versatileand easy to use that we also highly recommend it for the shop, crafts, model making, robotics for holding a working surface or tool, and for displays and collectibles. Very sturdy and high quality.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $49.95. S/H: $9.90


LOWRANCE FISH LO-K-TOR MODEL LFG-250
w/ TRANSDUCER

Very high quality. Used, tested and works great!!

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD099. - Price: $49.95. S/H: $13.90


COMPACT, PORTABLE AIR COMPRESSOR,
TIRE INFLATOR w/ POWERFUL LIGHT

Used, and works fine. There are a lot portable compressors and tire inflaters but few with a powerful lamp - real important if, for example, you have to service a tire at night or in the rain or snow, and you don't have a good flashlight or you prefer not to be messing around with

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $39.95. S/H: $11.90


VINTAGE IDEAL RUBBER GROOVER /
WOOD GROOVER / IDEAL TIRE GROOVER,
200 WATTS, MODEL 125

Stunning, This rare Item is not only a great tool collectible but it is very useful today. The "V"-shaped blades are still being sold Online; however, if you are good at improvising your own tools and parts, you can easily and inexpensively make your own blades to fit your own particular applications! Basically what we do to make a standard "V" groover blade is to heat a hack saw blade red hot in the middle and then bend it into a "V" or other useful shape, then snap off the ends to the desired lengths, then install it on the groover (easy one-screw installation). Can be fitted with single blades, multiple blades, etc. of numerous different shapes and sizes. Depending on the blade you install, this Ideal rubber tire groover can groove, cut, shape, engrave, imprint or bore into, wood, plastic, rubber and cloth. You can fit it with hole saw blades to easily cut round holes through materials that are too thin, delicate or soft to withstand drilling the holes with the hole saw. At 200 watts, there is not much in the way of wood, plastic, rubber or cloth it can't burn through. A blade can even be adapted to it for heavy-duty soldering. Put a die on it, and you can use it for hot-stamping items with logos, images, names, numbers, etc. Great for shop, hobbyist, crafts person and model maker. Be careful because like all big soldering irons, the groover gets extremely hot and can cause burns and fires if improperly used.

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LS093-R01, LS095-R01. - Price: $79.95. S/H: $10.90

Return to TOOL CATEGORIES

OTHER TRADES POWER TOOLS / ELECTRIC TOOLS: Carpenter Tools, Plumbers Tools, Appliance Repair Tools, Sheetmetal Tools, Welding Tools, HVAC Tools, Builder Tools, Construction Tools, Furniture Tools / Upholstery Tools, Landscaping Tools, Farming Tools, Gardening Tools, Ranching Tools, Tree Tools:

-
CHICAGO ELECTRIC POWER TOOLS, MODEL SIS-ZV-104X22
ELECTRIC CHAINSAW SHARPENER, ITEM 93213
4,200 RPM, 120VAC, 60HZ, 85-WATT

Used and in very good condition, barely used (virtually no wear on the sharpening stone). Chicago Electric Power Tools Electric Chain Saw Sharpener (Chainsaw Sharpener), MODEL SIS-ZV-104X22, ITEM 93213, 4200 RPM, 120VAC, 60HZ, 85-WATT.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD136. - Price: $39.95. S/H: $17.90.


LOT OF VARIOUS DENTAL TOOLS / DENTAL PARTS / DENTAL SUPPLIES

(Sorry, we recently sold this lot of dental tools; we are looking for more.) Used and in good condition. Lot of Various Dental Tools / Dental Parts / Dental Supplies. Other possible uses beyond dentistry. We have not tested any of these tools, so we do not know or can guarantee that they work or are complete.

LIMITED QUANTITY. We have only one of these left to sell.

BUYER: Order by Title (below image) - Email us your order. - List History: LD188. - Price: $9.95.


(4) SAFCO ROYAL CONTRA ANGLE DENTAL DRILL HEADS
VINTAGE HIGH SPEED DENTAL TOOLS (15,000 RPM)

(Sorry, we recently sold this lot of 4 Safco Royal Contra Angle Dental Drill Heads; we are looking for more.) Used and in very good condition. Safco Royal Contra Angle Dental Drill Head Tools, High-Speed Dental Tools (15,000 RPM). Two appear to be new, and two appear to be little used. One comes in its original box with cover, and another comes in just the bottom of the box (ie: box top missing). In our electronic shops, we use these with Dremel drills and dental bits for many fine drilling and grinding uses, especially great for tight spots, like inside of chassis. Also, great dental collectibles / dental tool collectibles.

LIMITED QUANTITY. We have only one of these sets left to sell.

BUYER: Order by Title (below image) - Email us your order. - List History: LD188. - Price: $49.95.

-
DUAL-AXES VIBRATOR / THUMPER / SHAKER
BULK MATERIAL HANDLING POWER TOOL
CONSTRUCTION SITE PANEL SHAKER / SETTLER

(Sorry, we are sold out of our popular Dual-Axes Vibrators / Thumpers; we are trying to get more.) Used and in very good condition. Duo Dual Axes Vibrator / Thumper / Shaker for Bulk Material Handling Shaker Power Tool. This tool is great for installing panels, plywood and sheeting for those construction site type situations where you have tight fits but don't want to take the chance of doing damage using heavy hammer blows to get the parts to fit together. This vibrator thumper shaker is also very useful when you need to handle or align light stacks of plywood, panels or boards. Comes with 3 rubber cups for various vibration types and levels. The rubber cups just slip on or off the steel arms, and can be easily cleaned or replaced (you can buy replacement rubber cups or make your own). Normally held by one hand, with a comfortable grip.

What makes this dual-axes vibrator much more effective than single-contact type vibrators is that it vibrates in two perpendicular axes. By tilting the device so that the edge of each cup is contacting the object being vibrated, much stronger vibrations are sent into the object, thereby obtaining much better and faster results than just using a vibrator thumper shaker with only one contact point.

This vibrator thumper shaker was originally made and sold as a powerful personal therapeutic massager, but has many other great uses, for examples:
          (1) Vibrating copier and printer toner cartridges when they appear out of toner to get 10%-20% more usage out of them (the vibrations cause the toner powder adhering to the toner cartridge inside walls to shake off so it can be used for printing / copying). And to prepare empty printer cartridges / copier cartridges for refilling, or to empty and clean containers of other powders or sticky substances. This vibrator/thumper/shaker can be used to shake the materials out of their containers.
          (2) To more efficiently fill bottles, jars, boxes, packages and trays with small objects (e.g. hardware parts such as screws, nuts and bolts, electronic parts, tool bits, pills, beans, viscous liquids, etc.) - the vibrations with the help of gravity cause the objects to more efficiently settle and closely arrange and compact themselves so that you can efficiently fit more objects into each bottle, jar, box or tray.
          (3) As a concrete vibrator or plaster vibrator to get the concrete or plaster to better settle into vacant spaces, eliminate air bubbles, and compact down. We have found it especially useful for setting posts (e.g. fence posts, sign posts), and for settling concrete pours along edges and corners where the concrete tends to adhere to framing boards, rebar, rocks and soil.
          (4) To help screen objects much faster than just hand-shaking. We have used this type of vibrator to greatly assist us with screening boxes and trays, and got good results with it experimenting with sluice boxes. And we also experimented with this type of vibrator for sanding and filing operations with some success - just a matter of improvising a jig to hold and position it for sanding and filing.
          (5) Vibrating stacks of paper pages so that you can more easily even up the paper stack along the edges. Office supply stores sell expensive paper stack vibrators - this vibrator does the same job just about as well.
          (6) Laboratory and mold shop material vibrator (e.g. plaster impressions). Scientific lab vibrator.
          (7) For mixing powders and liquids. Vibrations also cause stirring and mixing type actions.
          (8) Also great for loosening objects stuck together.
          (9) We even use these vibrators / thumpers to help clean difficult stains from carpets and upholstery. You soak the carpet stain / upholstery stain with your stain remover, then vibrate the soaked stain for about 5 minutes, then clean up the stain remover. We find this type of vibrator much more effective than just rubbing on the stain remover and vacuuming it up and more effective than ultrasonic carpet-cleaner vibrators (it works very similar to the way ultrasonic cleaners clean and polish small items but with much more power and at a lower vibration frequency).

Note, as with all power tools, be sure to wear the right protective gear, such as gloves, goggles, protective shoes, ear plugs, head gear, etc., and to always do things in a safe and sensible manner. This Dual Axes Vibrator, while powerful enough to do or assist in doing all of the jobs described above, does not have the power of a hydraulic jack hammer, nor does it have magical powers to do jobs for those who lack the skills, abilities and common sense to both safely and competently handle power tools.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD159. - Price: $59.95, S/h: $11.90.


6" DADO CHIPPER BLADES / DADO SPECIALTY BLADES
DADO CHIPPERS (for Radial Saws, Table Saws for Woodworking)

Used and in very good condition. 6"Dado Chipper Blades (Dado Chippers), Dado Specialty Blades for Radial Saws / Table Saws for woodworking. Some have carbide tips. Each lot has blades of various thicknesses from 1/16" thick to 1/4" thick. The arbor hole on the left lot is 3/4", and arbor hole is 5/8" for the right lot. CAUTION: These blades are very sharp - handle with the greatest of care.

LIMITED QUANTITY. We have only one of each lot of blades shown.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price (left 4 blades): $19.95, S/H: $9.90. Price (right 3 blades): $14.95, S/H: $7.90.

-

B&D MATRIX MULTITOOL QUICK CLAMP
JIG SAW ATTACHMENT
BLACK & DECKER QUICK CLAMP
SABRE SAW ACCESSORY

Used and in very good condition. Black & Decker Matrix Quick Clamp Jig Saw Multitool Attachment Accessory. Actually, you don't even need the B&D Matrix motor unit to operate this B&D Quick Clamp Multitool Accessory. All you need to do is to adapt a T50 Torx bit / star bit (T50 Torx bit not included) to a shaft, which shaft you can insert into a standard portable power drill or chuck and the T50 into the B&D Jig Saw's Attachment drive receptable - almost perfect fit. One use we got out of it was to position it upside down and use it as a small table saw. This B&D jig saw / sabre saw attachment is great for light to medium jobs.

LIMITED QUANTITY. We have only a few of these left to sell.

BUYER: Order by Title (below image) - Email us your order. - List History: LD170. - Price: $34.95, S/H: $9.90.

-

B&D MATRIX MULTITOOL QUICK CLAMP
DETAIL SANDER ATTACHMENT
BLACK & DECKER QUICK CLAMP
OSCILLATING CORNER SANDER ACCESSORY

(Sorry, we have recently sold this tool; we are trying to get more.) Used and in very good condition. Black & Decker Matrix Quick Clamp Oscillating Detail Sander / Corner Sander Multitool Attachment Accessory. Actually, you don't even need the B&D Matrix motor unit to operate this B&D Quick Clamp Multitool Accessory. All you need to do is to adapt a T50 Torx bit / star bit (T50 Torx bit not included) to a shaft, which shaft you can insert into a standard portable power drill and the T50 end into the Oscillating Detail Sander Attachment drive receptacle - almost perfect fit. One use we got out of it was to position it upside down and use it as a small table sander. This B&D detail sander / corner sander attachment is great for light to medium jobs.

LIMITED QUANTITY. We have only a few of these left to sell.

BUYER: Order by Title (below image) - Email us your order. - List History: LD170. - Price: $29.95, S/H: $9.90.


6" DADO PLOUGH & RABBIT WOODWORKING BLADES
+ OTHER BLADES (for Radial Saws, Table Saws)

Used and in very good condition. This lot consists of 9 woodworking blades for radial saws and table saws, all 6" and all with 3/4" arbor holes. Six blades are Plough & Rabbit Blades. One blade has 6 TPI, and another has 12 TPI. The bottom blade has tungsten carbide-tipped teeth, all intact and very sharp (Craftsman Safe Saw Model 720.4943). CAUTION: These blades are very sharp - handle with the greatest of care.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $39.95, S/H: $11.90.


ROUTER TABLE TOP / POWER TOOL PLATFORM
(also for DRILLS, GRINDERS, MILLING MACHINES,
CUTTERS, SAWS, SHAPERS, CLAMPS, VISES),
15-3/4" x 15-3/4" x 5/16"

With "X" cutout in middle. Very useful in the shop and laboratory as a permanent or temporary work table for numerous and varied uses, including those listed above. Can be used for many other general table top uses. Strong, sturdy and durable. Each "X" slot is 3-3/4" long and 5/8" wide. Used but in good condition (a few surface scratches).

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $39.95. S/H: $13.90.


RARE SEARS CRAFTSMAN ROUTER EDGE GUIDE
Model # 3-616563-01

(Sorry, we recently sold this Craftsman Sears Router Guide, Model #3-616563; we are trying to get more.) Used and in very good condition. Rare Sears Craftsman Router Edge Guide, Model # 3-616563-01, with Fine Adjustment. Rods are 12" long and 1/4" dia, and separated by 4-7/8" (center-to-center). Can also be used as a small vise or holder.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD159. - Price: $39.95.


ROUTER GUIDE, ROUTER MOTOR BRUSH, OTHER PARTS

In great condition, may be new or used. These are sturdy heavy duty router parts for unknown router, and includes router guide, new router motor brush (carbon motor brush with spring), large router steel fence (9-3/16" wide), angle guide, and standoff. Guide rods are 3/16" diameter, guide spacing is 4.5" apart, and guide assembly is 9" long. We got these at an estate sale - a previous buyer bought the router days earlier but failed to pick up these parts, so owner sold them to us.

BUYER: Order by Title (below image) - Email us your order. - List History: LD111. - Price: $24.95


ROUNDOVER ROUTER BIT, 1/2" ROUNDOVER BIT, CARBIDE TIP

Roundover router bit with carbide tip, 28,000 RPM. Used on 2 boards (70-inches total), and in great condition.

BUYER: Order by Title (below image) - Email us your order. - List History: LD111. - Price: $14.95


RARE, VINTAGE LARCH PAINT REMOVER,
LARCH ELECTRIC PAINT REMOVER TOOL

Used and works great, and in very good cosmetic condition. A great tool collectible, yet works fine if you want to use it as a tool.

LIMITED QUANTITY. Unique Item. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD099. - Price: $95.95. S/H: $11.90


VINTAGE SEARS CRAFTSMAN SABRE SAW
(IN STEEL CASE, MODEL # 31527941 458)

Used in good condition. Case has a strong handle, and will fit other saws and tools. Case also has slots for storage of sabre saw blades. Great tool collectible or you can use it in your work. Having a sturdy case for your saw is really great, especially if you work on construction sites, in the field, out of the back of your truck or van, etc.

BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $39.95. S/H: $10, 10 lbs

Return to TOOL CATEGORIES

ELECTRICAL & ELECTRONIC POWER TOOLS / ELECTRIC TOOLS: Electronic Tools, Electrical Tools, Electrician Tools, Computer Tools, TV Shop Tools, Cable Tools, Laser Tools, Robotics Tools, Technician Tools:


ELECTRICAL PROBE PAIR, DUAL ELECTRODES,
PL-259 CONNECTOR w/ PL-259 TO BNC ADAPTER

This is an unmarked dual-electrode probe that does not come with a user manual or original packaging. We do not know what its original application is. It is rugged, heavy-duty and very high quality. Probe is used and in excellent functional condition. We checked and continuity is fine between the probe electrodes and connector pins. The probe has a heavy sliding slam handle in the middle, very similar to a car dent puller tool. This is so you can drive the probe through tough materials with just the right force and no need for a hammer to pound it in. Only the exposed ends of the electrodes are conductive, so measurements are made only between the electrode tips.

This device is very versatile. It can be used to measure something at the electrode end and/or to deliver electrical power or electronic signal to the electrode end, depending upon the equipment you have it connected to. We do not think that it is used on soil, but perhaps to penetrate something tough but relatively uniform like animal hides, tree bark, etc. The probe is clean and free of odors so We have no idea how it was previously used or how much used.

The probe's PL-259 connector is the same connector type used in many, especially older, CB radios, and is found on some electronic test equipment. A BNC adapter is also provided to connect it up to many types of test equipment and signal generators with BNC connectors. Cable is 3' 8" long. Electrodes are about 1/16" thick steel, 1-1/8" long and 1" apart. Electrodes are screwed ON and can be replaced with the same type of electrodes or with other electrodes which will fit.

Probe looks cosmetically very good except for a few scruff marks on body opposite side of cable feed. Probe is about 12-1/4" long and 1-3/4" dia. CAUTION: Electrode tips are pointed and sharp, so please handle with care.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD098. - Price: $149.95. S/H: $9.90


RARE WALL MFG. TRIO-R-HEAT TL-650/U SOLDERING GUN
NO. 2100 HANDLE PISTOL GRIP

Used and in great condition. Rare Wall Mfg. Trio-R-Heat TL-650/U Soldering Gun (No. 2100 power handle, pistol grip), no tip or dual heating element, comes with a 1-page User Manual. Bottom hole (7/8" dia) has a light bulb (which works), bayonet car type. Top hole (5/8" dia) normally fits a dual soldering heating element, last we looked, both the heating elements and tips were still available (Sears). Also, many other useful plug-ins can be fabricated to use here. Trigger action results in a clicking snap switching action, so you have a firm feel as to when it is triggered ON and OFF. We bought these originally to experiment with possible stun gun applications, and for highly directional remote control applications ("point-and-shoot"). This Wall Mfg. Trio-R-Heat Soldering Gun is almost identical to the Sears Craftsman Professional Soldering Gun, Model 579-273200, 400/150 watts. We have both, and use the same heating element in either with no problem. The only known functional different between these Wall TL-650/U Trio-R-Heat Soldering Guns and the Craftsman 579-273200 Soldering Guns is that the Wall Soldering Guns have a push-ON / push-OFF light switch in the back, while the Craftsman Soldering Gun light comes on only when the trigger is pulled. The Wall also looks better built than the Craftsman. The "400/150 watts" means that the soldering gun idles at 150 watts, but kicks up to 400 watts when applied - which puts it way up on the upper end when it comes to power compared to almost all other soldering guns, which usually top out at 125 - 150 watts when used.

LIMITED QUANTITY. We have only two of these left.

BUYER: Order by Title (below image) - Email us your order. - List History: LD126. - Price: $39.95


FUTABA DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM,
FUTABA FG SERIES, FP-TF-AM MODEL RADIO CONTROLLER

Used. We are not in a position to test this RC device, so it is sold as is. Because this is a type of RF transmitter as with all RF transmitters we may be selling, we are selling it to be salvaged for its materials only. We bought this at an Estate sale with a bunch of other remote control and model airplane type stuff because no one but the deceased was into remote control devices in his family. His family said that there was no known problems with any of model airplane devices or with any of his other remote control devices at the time of his death. On the back, it has a sticker that says "46" and "72.710 MHz". We are selling a lot of model airplane / remote control type Items in my webpages, so be sure to check it out.

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD0961. - Price: $69.95


ACOUSTO-OPTIC LASER /
OPTICAL DEVICE, AO

New. We got this device at an estate sale. We don't know what it does. It has precision lens and mirrors inside of it. The connector is a 4-pin DIN connector. There is no model number or boiler plate on it. It has a label that says, "AO", which most probably means Acousto-Optic." Someone told us that this is a photo adapter and shutter for use with the AO 1190 Expostar exposure control. Do you know what this thing is?

LIMITED QUANTITY. Unique Item. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD093. - Price: $129.95


LASER POINTER / DENTAL WAND
(CABLE BAND READS: E29 4520 922086)

I got this at an estate sale. There is nothing stamped on it to indicate who made it and what exactly is it for. It has a long coiled cable terminated with a RJ-45 connector (same type of connector called an "Ethernet connector"). A band on the cable has the numbers above printed on it. That is all we know. Do you know what it is or who made it? we figure that it is either a laser pointer or a dental curing wand (for quickly curing some types of dental cements). We have only one.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $39.95


PRECISION LASER MOUNT,
PRECISION LASER LEVELLER, NRC MODEL 811

Used and in great condition. This scientific instrumentation is made by Newport Corporation. Has two precise vernier adjustments for great precison and repeatability. One adjusts the tilt and one adjusts the azimuth. Originally designed to level lasers, it can also be adapted for use with some Dremel-type drills, camera lens, drill presses, milling machine, telescopes, mirrors, lenses, rifle barrels, etc. Tube has a 3/8" center hole at the top, which makes it ideal for drill presses and milling machines to access. Really useful laboratory instrumentation. Base is 3-7/8" x 3". Tube is 3" long, with 1-3/4" inner diameter.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD093. - Price: $89.95


POWERFUL HE-NE LASER,
Toshiba LG-3217, 10"

This fantastic industrial laser / scientific laser worked great when we used it last about 3 years ago. We 've stored it in my lab ever since. We can no longer locate its power supply, so we can't test it to verify current operation. Very high quality and ideal for the serious laboratory experimenter. Underneath the rubber nipple in the front there is a beautiful laser lens and focusing system.

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD049, LS092-R38. - Price: $59.95

Return to TOOL CATEGORIES

OTHER PROFESSIONAL POWER TOOLS / ELECTRIC TOOLS: Precision Tools, Laboratory Tools, Office Tools, Locksmith Tools, Drafting Tools, Phototography Tools, Jeweler Tools, Watchmaker Tools, Medical- / Dental-type Tools, Beauty Shop Tools, Shoe Shop Tools, Geology Tools, Archaeology Tools, Paleontology Tools, Astronomy Tools:


HOLMES AIR HCF-800 HEPA FILTER CARTRIDGE,
for MODEL HE-7000 & HE-7004 AIR PURIFIERS

New in the bag. The HCF800 combines the popular HEPA type particle filter with an activated-carbon layer for enhanced air cleaning. This filter fits into Holmes air cleaner / air purifier units, Model HE7000 and Model HE7004. HEPA filters trap virtually all microscopic allergens and dust. HEPA type filter efficiency is over 99%. Activated-carbon traps environmental cigarette smoke and other noxious odors, as well as 4000 chemicals. 9.8" x 6.3" x 1.3". Filter lifetime is 3 - 6 months under normal residential conditions. Can be used in homes, offices, shops, laboratories and industrial situations for great micron anti-microbial and anti-bacterial filter protection, and adapted to other uses as well.

LIMITED QUANTITY.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LR093-S01, LR095-S01. - Price: $9.95.

-
-
-

SEARS CRAFTSMAN ROTARY POWER TOOL ROUTER ATTACHMENT
Converts Rotary Tools Into Mini Routers, Model 953097 / 53097
w/ User Manual + Original Box

Used and in very good condition. Sears Craftsman Rotary Power Tool Router Attachment, Model 953097 / 53097. With User Manual + Original Box. Converts Rotary Tools into Mini Routers.

LIMITED QUANTITY. We have only one of these left to sell.

BUYER: Order by Title (below image) - Email us your order. - List History: LD188. - Price: $29.95.


BOSTON ELECTRIC STAPLER. MODEL 100

Used and in very good condition. Boston Electric Stapler, Model 100, white color. 115VAC, 1 amp. 7-1/2" x 4" x 2".

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD153. - Price: $29.95, S/H: $6.90.


RARE, VINTAGE LIGHT STIMULATING KIT
w/ SETS OF WEDGE LENS

Used, and works great. This kit holds a device and its attachments which appear to be a light therapy kit or light scanning kit for examining limited areas close up. We bought it from a guy involved in radionics research decades ago, who told us that it was used to enhance the effects of certain chemicals, but he wasn't specific. Comes in a nice soft case, which was probably not its original case. We do not know who makes it, how old it it, or what its original intended application was. Do you? After collecting these weird types of devices for decades, we 've only run into 3 of these and they were all different. Makes a great medical collectible.

UNIQUE ITEM. We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD093. - Price: $99.95


LINEAR LEDEX SOLENOID ACTUATOR /
LEDEX ACTUATOR LINEAR SOLENOID /
LINEAR LEDEX ACTUATOR SOLENOID 81840 1/4"

New. One new solenoid linear actuator. These very high quality machined stainless steel Ledex linear actuator solenoids are incredibly useful for many laboratory and electrical uses. The Ledex linear solenoid actuator coil is 16 ohms and 4mH. 2" x 2" x 1/2". 6" leads.

LIMITED QUANTITY.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061. - Price: $19.95


SAFETYLIGHT SAFETY LIGHT,
25 WATT, MODEL 57
PHOTOGRAPHY, SHOP, LABORATORY USES

Used in good condition. Photo Materials Co. safety light. Rotary power switch built into line. Base allows for screw-mounting. Light enclosure is 7" wide, 5-1/4" high.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $29.95


TWO MICROPHONE GOOSENECK EXTENSIONS
+ MIKE HOLDER

Used and in great conditions. Two mike gooseneck extensions plus other mike holder. Both extensions are threaded at one end to screw on mike stand, with mike holding trough at other end. Also included is a part that is not a gooseneck but which also has a mike trough (and a hole in the middle to possibly hold a rod or extension of some type).

BUYER: Order by Title (below image) - Email us your order. - List History: LD111. - Price: $49.95


HEAVY-DUTY PROFESSIONAL, INDUSTRIAL QUALITY
40" LONG INSULATED FLEXIBLE GOOSENECK EXTENSION /
FLEXIBLE GOOSENECK HOLDER /
FLEXIBLE GOOSENECK SHAFT

New. Professional, instrumentation-quality 5/8" thick, 40" long flexible goose neck extension / holder / shaft. Much stiffer and longer than standard gooseneck flexible shafts you find on lamps. Has an instrumentation clamp at the end. One end of the gooseneck is a 5/8", 2" long dia. solid stem. The other end has a clamshell type clamp, outer dia. is 1.5" and hole is 0.5", hole is perpendicular to gooseneck shaft. This clamp has two screws at the top; when you remove them, the top semicircle part comes off. You can then place on the bottom half hole a 0.5" or so dia. pipe, tube or rod, and then place and screw the top part back on. Or if you wish, you can just simply bolt right throught the hole what you need to attach to the gooseneck. This clamshell type clamp stiffly rotates independently of the rest of the gooseneck. Of course, either end can be modified to suit your particular needs.

This is the best quality, stiffest gooseneck we 've ever run into. If your load is particularly heavy (5+ lbs), you can easily much increase shaft stiffening by putting heat shrink tubing or even lawn hose over all or part of the shaft (for hose, slit it down the middle its entire length, then work it onto the shaft, then tape or cement the seam closed).

Great for shop, office, scientific laboratory, crafts, sewing, band / orchestra, model-making, robotics, etc. operations! This gooseneck flexible extension can be used to control the position of a mike, tool (e.g. power drill / grinder / polisher, such as Dremel equipment), magnifying glass, microscope, test equipment, lamp, camera, mirror, reference book, phone, small computer or display, monitoring device, parts supply bin, soldering iron, cup holder, etc. that you need immediate or convenient access to but don't want it cluttering up your desk or shelf. Should much increase your capability and efficiency. The cheapo commercial lamp-top goosenecks are a very poor and unsatisfactory substitute for most practical applications of goosenecks (even when stiff enough for light loads, cheapo commercial goosenecks are usually too short). These industrial-grade goosenecks are not commonly available, and usually much more costly than the cheapo ones.

LIMITED QUANTITY.

BUYER: Order by Title (below image) - Email us your order. - List History: LD049, LR095-S01, LR098-S01. - Price: $45.95. S/H: $13.90


BRUNING ELECTRIC ERASER #87201, DRAFTING, DRAWING, w/ 30 ERASERS

Used and works great. Bruning #87201 Electric Eraser for drafting and drawing, in original box with 30 erasers in their boxes. 115VAC, 60 Hz.

LIMITED QUANTITY. We only have this one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD108. - Price: $39.95

Return to TOOL CATEGORIES

ACTIVITY POWER TOOLS / ELECTRIC TOOLS: Dremel Tools, Crafts Tools, Hobby Tools, Model-Making Tools, Sports Tools, Gun Shop Tools, Music Tools:

-

RARE, VINTAGE VIN-MAX PUFF IRON IN ORIGINAL BOX
Great Collectible + Many Craft / Modeling / Shop / Clothing/Fabric Uses

(Sorry, we have recently sold this Vin-Max Puff Iron; we are looking for more.) New old stock (NOS). Rare, Vintage Vin-Max Puff Iron (Model 2) in Original Box. Made in USA. Great collectible. Great for many craft, modeling, shop and clothing uses. Back in the day, puff irons were used to produce ruffles, puffed sleeves and puffed shoulders in fancy blouses. These days, add to their traditional functions:
      (1) Heat installation of thermal-adhesive patches, insignias and name tags onto caps (e.g. baseball caps), clothes, fabrics and other objects.
      (2) To smooth out wrinkles and to dry out damp areas, especially in curved areas.
      (3) Great for crafters, model-makers, artists and sculptors, and for plastic modeling, modifications, and replacement jobs, this Vin-Max Puff Iron softens plastic to mold plastic sheets and other plastic objects into the shapes you require - sort of a thermal version of an English wheel for thermally shaping plastic.
      (4) Great for repairing cracks, splits and dings, and for smoothing in some plastics. In some cases, this iron can be used to melt the plastic to the point that edges of cracks can be welded together and rough or dinged surfaces smoothed over.
      (5) Can be used to temporarily heat up a confined space.

CAUTION: This special iron is not originally designed by its maker to perform any function other than those recommended limited to cotton fabric puffed sleeves and puffed shoulders, indoor uses only. While we have applied a second Vin-Max Puff Iron that we use in our shop to all of the above (1) - (5) other functions over the years with great success and no problems, if you do so, do so very carefully and totally at your own risks.

115VAC, 40 Watts. CAUTION: This is an iron and it gets hot, and can burn you if handled recklessly. So treat it with the same great respect as hot clothes irons and protect all that may come into contact with it when hot, do not store while hot, and do not get it wet or expose it to flammable fluids and materials. The black & green posing blocks shown in one photo are not included. This sale is for one (1) puff iron.

LIMITED QUANTITY. We have only one of these left to sell.

BUYER: Order by Title (below image) - Email us your order. - List History: LD170. - Price: $249.95, S/H: $11.90.


125+ PAGES OF DREMEL USES &
DREMEL TECHNICAL INFO MANUALS

Used and in excellent condition. 125+ pages of Dremel Uses and Technical Information Manuals.

LIMITED QUANTITY. We have only one of these sets.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $19.95.

-
BEC-1 HOT ROPE CUTTER / HOT CUTTER /
HOT WOOD CUTTER / HOT PLASTIC CUTTER /
HOT ELECTRIC ROPE CUTTER / HOT KNIFE
Berkley & Co.

Used and in very good condition. Berkley & Co. BEC-1 Hot Rope Cutter / Hot Wood Cutter / Hot Plastic Cutter / Hot Electric Rope Cutter / Hot Knife. This hot cutter is an excellent tool for cutting rope, fabric, leather, light wood and light plastic stock and pieces fast and cleanly and without the vibrations you get from power saws or using force with manual cutters and scissors. This hot rope cutter is especially good for cutting nylon rope, string or webbing because it melts and fuses the ends of the nylon pieces so neither piece unravels (same for Dacron, polypropylene). This hot knife tool is great for most shops, but especially for the crafts shop and modeling shop, and also for sports and other activities which use rope and string. The hot rope cutter blade is 1-1/2" long. Internal thermostat-controlled. Stable base. CAUTION: The blade on this hot rope cutter is nearly razor sharp and can get very hot, so handle with great care. And when using the cutter to cut objects that may produce fumes, such as plastic and leather, be sure to use it in well-ventilated areas. Always wear protective eyewear and gloves. Not for use in wet areas (e.g. outdoors, near bodies of water, in bathrooms and kitchens, etc.). Base is 5" x 2-3/4" x 2-1/2".

LIMITED QUANTITY. We have only a few of these left.

BUYER: Order by Title (below image) - Email us your order. - List History: LD137. - Price: $99.95. S/H: $16.90.


Vintage No. 2 DREMEL TOOL /
MODEL No. 2 MOTO-TOOL DREMEL TOOL

This is the rare, very high quality Dremel Model 2 Moto-Tool - perfect Christmas or birthday gift for that tool guy in your family! A stunning collectible! And it works great. And it comes in a padded sturdy metal box (not shown), with 10 bits (not shown). Just look at the quality of the Dremel 2! Quality you don't see any more in many tools. Much of the body is made of bakelite. And just look at the spring-protected power cord strain relief, and the protective shroud in the front. We are auctioning this off as a real bargain for you when you consider how much common new Dremel and similar tools are priced. If you collect Dremels or fine vintage tools, you absolutely must get this Dremel! Once it sells, if you aren't the high bidder, you might be kicking yourself in the rear end for missing out on it.

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD049, LS092-R25. - Price: $134.95. S/H: $11.90


DREMEL MOTO DRILL PRESS MODEL 210 w/ ADJUSTABLE STAND

Used and in great condition, but a bit dusty. Some surface corrosion but nothing which significantly interferes with function. This is the Dremel Moto Drill Press Stand, Model 210, with height-adjustable stand. Many crafters consider the Dremel Moto Drill Press Model 210 superior to the Dremel Model 212 drill stand, because the much more easily manufacturable Dremel Model 212 is built like a standard drill press with a top handle for pressing down on the work. Since the Dremel Model 210's height is adjusted by raising or lowering its platform base, it is more precise, especially if precision of depth is important and for precision machining work.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD121. - Price: $49.95. S/H: $11.90.


DREMEL STAND / DREMEL STATION / DREMEL MOUNT
w/ TILTING HEAD FOR DREMEL ROTARY TOOLS

Dremel Stand / Dremel Mount / Dremel Station with tilting head. Ideal for Dremel Rotary Tools. Used and works great. The head tilts through about 180 degrees, rotates through 360 degrees, and swing sides-to-side about 20 degrees. The wing nut and bottom of base have some surface rust but otherwise in good cosmetic condition.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $39.95


VINTAGE MOTORIZED HANDHELD DREMEL, MODEL A
HOBBY SCROLL SAW, JIG SAW, RECIPROCATING SAW

This is a used vintage handheld motorized Dremel scroll saw / jigsaw / reciprocating saw, Model A, and works great. Operates off of 115 VAC, 60 Hz, 50 watt. This Dremel jigsaw uses common 3" scroll saw blades. Throat is 10" deep for easily doing even deep work. Can use modified blades to also do sanding, grinding, polishing and slicing. Being able to handhold a powered scroll saw means that you can much more easily do difficult jobs in tight situations, fast, accurately and with minimal stress, strain and risk to you and the work. For example, this is a great tool to use if you've got to cut a pipe underneath your sink or car. This scroll saw can be used as a great collectible, or very versatile and useful shop saw, craft saw, model-making saw, automotive saw, and construction site saw.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $49.95. S/H: $9.90

-
DREMEL PLUNGE ROUTER ATTACHMENT /
DREMEL ROUTER JIG / DREMEL ROUTER ADAPTER

Used and works great. Dremel plunge router jig / attachment / adapter. Very high quality as opposed to some other router jigs purported for Dremel tool use. Anyone who's ever used a Dremel router knows just how cleanly cut rabbet or mortise the Dremel gives. Large standard 1/2" routers are just not designed to do the small precision routing jobs one needs for craft, hobby and modeling needs. This Dremel plunge-router adapter is designed to be used with the Dremel rotary tools (Dremel Models 398, 395, 285, and 275) (also believed to work with Dremel Models 300 and 400), all which accommodate 1/8-inch diameter bits. If you already own one of these tools, buying this Dremel router adapter is a great way to get an instant router without having to spend another $50 for a single-purpose router requiring you to change router bits for each job - with this Dremel router jig you can easily swap between Dremel tools with different bits installed at calibrated depths to precisely and quickly do step-by-step jobs. Easy to install and use your Dremel rotary tool. This Dremel attachment features tunable plunge depths, set by turning a screw, which is locked in with large plastic nuts (lesser Dremel router jigs have only two plunge depth settings). The clear base of this Dremel router adapter gives you good visibility and stability - lets you see exactly what you're doing, as does the relatively thin profile of the Dremel tool itself. This Dremel router attachment also includes an adjustable edge guide that works very well. This Dremel jig is truly the ultimate router adapter for all small router jobs. Great for the shop, crafts, jewelry and collectibles work, model-making, robotics, miniature furniture manufacture, etc.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $29.95. S/H: $9.90.


-
RARE, VINTAGE FRANKLIN MFG. CORP. ELECTRIC
GOLD LEAF EMBOSSING MACHINE / GOLD LEAF EMBOSSER /
GOLD LEAF PRESS, Plus GOLD LEAF / GOLD FOIL,
Plus 3 SETS of CAST METAL TYPESET

(Sold, no longer available; email us if you want us to look for another). Used, and in very good condition. A little surface corrosion but functionally works very good. Rare, vintage Franklin Mfg. Corp. Gold Foil Embosser / Gold Foil Embossing Machine / Gold Foil Press with Gold Leaf / Gold Foil material (about 3/4 filled spool as shown), and three sets of Cast Metal Typeset in original boxes. Electric (to heat up the foil for maximum adhesion). Professional, heavy duty and industrial grade. Great for jewelers, crafters, and everyone who wants their cards and other objects to look really ritzy, expensive and sophisticated. The boiler plate on this Gold Embosser states, "23K DURA GOLD LEAF". However, we do not know what the purity or weight of the gold is in the gold leaf, or even for certain if it is real gold leaf (we don't know what else would require an expensive gold press like this). Great collectible.

UNIQUE or VERY RARE ITEM: We have only one of these FRANKLIN MFG. CORP. GOLD FOIL EMBOSSERS, and it is apparently so rare that we cannot decide what price to put on it. However, we want to sell this FRANKLIN MFG. CORP. GOLD FOIL EMBOSSER at a fair price to both of us. Interested? Then freely document what price range this FRANKLIN MFG. CORP. GOLD FOIL EMBOSSER is worth and make us an offer (if possible). We will seriously consider and respond to all offers we consider reasonable. If you know of anyone who might be interested, then please freely refer him/her to this listing, and if we agree to sell it to that person, he/she buys it, pays for it in full, his/her payment totally clears (allow 90 days for checks and money orders (except Postal M.O.) to clear), sold at $100+, and he/she does not ask for a refund within 60 days of receipt of Item, we will pay you a 10% finder's fee based on the paid price. Payment by PayPal, credit card or COD not acceptable.

BUYER: Order by Title (below image) - Email us your order. - List History: LD130. - Price: See above; FREE S/H (12 lbs wgt.)


RARE, VINTAGE UNGAR ELECTRIC MIRACLE PENCIL KIT
w/ WRITING PAPERS: Gold, Silver, Purple, Red, Blue, Green

Used and in great condition. Rare Ungar Electric Miracle Pencil Kit with gold, silver, purple/violet, red, blue and green writing papers. Circa 1950s, 115 VAC. The "soldering iron" has a tip ideally pointed for engraving and writing on wood, cardstock, paper and plastic. The purpose of the colored papers, as shown, is to engrave the colors into the object you are engraving. Perfect for the person who is really styling and anxious to impress!

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD121. - Price: $99.95


SULLIVAN HORNET MODEL AIRPLANE STARTER,
HAND-HELD ENGINE STARTER

Used, in mint condition. This Item is the Hornet Starter for model engine propellers, especially for small airplane engines to .12 size. The Hornet features a high RPM high torque motor, heavy duty bronze switch and a reversible silicone drive adapter for powerful gripping. It is easy to hold even for smaller hands. Ideal for both CoxR and NorvelR size engines. Can easily attach onto a PowerPac (not included) for total portability. Uses replacement Silicone adapter S622 cup for ideal gripping. 12 VDC operation, maximum 25 amps, power cable has alligator clips for fast, easy connections. No. S598.

We have only one of these. We are selling a lot of model airplane gear in my webpages, so be sure to check it out.

LIMITED QUANTITY.UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $24.95. S/H: $15.90



ROMANOFF RUBBER CO.
INDUSTRIAL-GRADE, HEAVY-DUTY, STEEL
HAND-OPERATED COLD PRESS / HOT PRESS

Great for the machine shop, crafts shop, general shop, factory, other business, or home. Weighs about 50 lbs. 14.25" tall when cranked all the way down. 12" long handle (which can be extended for greater pressing power using a pipe extension. Plate area is 5" x 8" and raises up to 4" for thick objects, and cranks all the way down until the top and bottom plates seat together for paper-thin objects. Plates heat up to very hot (so be careful!), so thermal press can be used as hot press or cold press - whatever your jobs call for. Worm screw is 1" thick steel. While We have had it cranked down to about 1,000 lbs of pressure, best we could tell, it was not even close to its limit (which is not stated on its boiler plate and is unknown).

Just consider some of the practically unlimited clamp, vise and press functions that a press like this can do for you with the appropriate dies and forms (no dies or forms come with it): (1) Flattening metal, bending metal, forming metal shaping metal, and swaging metal. (2) Pressing on cold or hot patches, silkscreens, logos, signatures, boiler plates, etc. (3) Burning images or melt images under pressure into wood and plastic. (4) Using "cookie cutter" type dies to cut out or punch either cold or hot shapes in wood, plastics and light metals. (5) Printing press. (6) Crushing or pulverizing rocks, bones, and other crushable objects and materials for mechanical, thermal, geological, archaeological, paleontological, forensic, chemical, biological, biomedical, etc. applications. (7) Press fitting gears, pins and rivets. (8) As a punch press. (9) Embossing images and lettering into just about anything that can fit into it that is wood, plastic and thin/soft metals. (10) Hot or cold pressing and laminating flowers and leaves and other collectibles. (11) Ironing clothes and other fabrics, such as collars and sleeves. (12) For many other hot or cold glue or cement jobs. (13) Hot-separating things stuck together. (14) Compacting items. (15) Sterilization purposes. (16) Holding items secure for just about any reason (e.g. lumber, rods, pipe, tools, etc. for drilling, sawing, grinding, threading, etc.). (17) Non-press applications where one just needs a hot surface or to heat something in a temporary oven (e.g. by opening up the plates, inserting what needs to be warmed or cooked, wrapping the exposed area with aluminum foil so heat won't escape, turning on the heat.)

You simply cannot go another day without having this highly versatile, useful and heavy duty tool in your shop, factory, business or laboratory!

Note that the white material between the steel plates is some kind of high-temperature insulating material so that the plate heaters concentrate virtually all of their heat into what is being pressed.

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD049, LS092-R10. - Price: $259.95. S/H: $57, 57 lbs

-

WARNER ELECTRIC CO. MODEL 46 HOT PRESS/COLD PRESS, 400W

(Sorry, currently sold out; nice cold/hot press and looking for more). Used and works great. Warner Electric Co. Model 46 Hot Press / Cold Press, 115V, 400 Watts.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD121. - Price: $199.95. S/H: 13 lbs, $9 Handling


LARGE HOT WAX BATH FOR TOOL PRESERVATION /
PARTS PRESERVATION, CASTINGS, ETC.

Used, clean and works great. There is a hairline crack on lid as shown but it does not affect function or operation.

Look around your shop and we are sure you will find dozens, if not hundreds of valuable tools and parts now being constantly exposed to damage from accidental mechanical contact, dirt, grime, chemicals and corrosion (especially if you live in a rainy or humid area or near ocean) - drill bits, chisels, milling machine bits, saw blades, router bits, screwdriver tips, punches, etc. And exposed sharp edges and points present safety risks. One of the best and easiest ways by far to protect and preserve tools and parts - especially the pointed or cutting ends and edges - is to dip them in hot wax. In fact, you'll find that this method is typically used with new expensive milling machine bits and router bits. When you need the tool or part, you simply peel off the wax, which you can then reuse in the pot (or use as hobby wax to help postion screws, nuts and other small parts, seal holes, etc.).

Great for tools, parts and other gear you seldom use, critical, expensive, kept in reserve, taken on trips (e.g. your car tools, truck tools, boat tools, airplane tools), and used outdoors (e.g. camping, hunting, fishing, hiking, climbing, water sports, spelunking, survival training, other outdoor sports and activities). And great for things you are going to store for long periods of time, for example, for survival purposes.

Wax preserves steel, iron, aluminum, brass, bronze, copper, silver, gold, other metals, some types of plastic (high-temperature plastics), ceramics and wood. Especially in a cold or wet environment and/or using a higher-temperature wax where the wax won't melt in the hand due to your body heat or get slippery, waxing a metal tool handle and/or shaft can also both electrically insulate and thermally insulate the tool, and even improve the grip of the tool.

Also, if a tool or part has a sharp point or cutting edge, wax coating helps prevent accidental stabbing or cutting injuries, as well as breaking and dulling of the edge or point.

This waxer can also be used to melt wax for molds and casting applications, such as for making small toys and parts. And when not turned on, the tub is also convenient for mixing cold mix materials such as paints, plaster, plant soils, etc. Practically endless uses for this wax machine. The inside surface particularly resists wet materials sticking to it, and makes it easier to clean.

Fast and easy to use! You just place the wax machine on a flat, level, sturdy surface (out of reach of children and pets) in a clear, clean, dry work environment, plug the wax melter in, turn the wax melter ON, allow the wax to melt (adjustable heat settings), and gently dip in your cleaned tools or other items one at a time to the level that you want the wax to protect, allowing the wax on each item to cool and solidify before touching. When you get ready to use the protected tool or part, you simply and easily peel the wax off. Removing a protective wax coat is much easier than removing a protective varnish or paint coat.

Come half-filled with a clear, colorless wax. There are many sources of cheap wax these days. We generally just buy cheap (usually half-used) candles from garage sales and flea markets for under $1 per pound - much cheaper than special cold liquid dips sold to preserve tools. Note that there are considerable variations in waxes - some hard high-temperature waxes and some soft low-temperature waxes. This machine has an adjustable temperature and will handle a wide range of these variations, so you have the flexibility to choose the ideal wax and melted liquidity for your uses based on hardness, melt point, etc. You can also use waxes of different colors, for example, to distinguish types of tools you are protecting, for example, one wax color for screwdrivers and another for chisels.

Also great for preserving precision machine parts and automotive parts (car parts), preserving jewelry, preserving silverware, preserving hobby and craft items, preserving coins, preserving insects, plant leaves, flowers, your old baby's shoes, preserving precious personal items from a beloved dearly departed, preserving religious artifacts, preserving fossils, preserving rock specimens, preserving gems, preserving collectibles of many types, etc. And hot wax is also great for sealing containers, letters, packages, etc., and for preserving and tamper-proofing them. And for preserving and insulating batteries, electrical terminals (e.g. your car battery terminals), electrical contacts, match boxes, and small ammunition boxes, especially if you are going to spend some days in the wilderness camping, hiking, fishing or hunting. Great also if you are being transferred to an area with a lot of blowing sand, such as the Mid East (e.g. Iraq, Afghanistan, etc.) where you want to keep sand out of items important to you and possibly to your own survival. Having worked at White Sands, NM, for years testing guidance packages on its famous high-G, high-speed Test Track, we discovered that fine blowing sand will infiltrate even into the tiniest spaces, even containers with tight lids (some sand is as fine as confectionary sugar), and contaminate or damage the contents, so even tight containers don't always protect well enough against water (if submerged), gasoline, oil or sand but wax hermetically seals).

Note: Prior to using a hot wax method on any expensive or irreplaceable item or critical situation (e.g. survival training), first experiment with it on much cheaper versions of your items to be sure that hot wax won't cause any kind of problem for you or the preserved item. Caution: The wax gets very hot when it melts, so use carefully with caution to prevent possible injuries and damage. Again, keep always keep hot wax away from pets, children, and irresponsible people just like you would with a boiling pot of stew. Always wear eye, face and hand protection, a heavy long-sleeve shirt, jacket or shop apron, and never drop or throw items into the hot wax as the hot wax may splash onto unintended things. Always gently place and remove items being waxed. We usually tie a cotton string (with a hook on the end) around an unwaxed part of the item to be waxed, and then gently lower item into the wax to the desired depth and then gently raise it out, and then hang the item on a strung rope by the hook until it completely cools and wax solidifies before touching the item. Made by Gema. 15" x 9-1/2" x 8".

UNIQUE ITEM - We have only one of this Item.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LS092-R12. - Price: $79.95. S/H: $12, 12 lbs


ELECTRON BEAM MODEL ROCKET KIT
(no rocket motors included)

This model rocket kit includes the Electron Beam launcher module, and a 5" diameter launch pad. While 4 rocket motors are also shown in the image, rocket motors are NOT included - sorry. Use the greatest of safety when practicing model rocketry and with responsible adult supervision, and aside from having a lot of fun, learn a lot of science and math from it. U.S. customers only.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $24.95


COPPER CLAD RODS /
COPPER CARBON CUTTING RODS
COPPER CLAD CUTTING RODS /
COPPER CLAD WELDING RODS /
CARBON WELDING RODS (CARBON ARC HD, 350-600 Amps)
COPPER-GRAPHITE ELECTRODES /
COPPER GROUNDING RODS

New old stock, NOS. Round copper-clad cutting rods / copper clad welding rods are new, 12 inches long, 3/8" diameter. Copper cladding greatly improves current conductivity, thereby making these copperclad graphite carbon rods far superior to the non-copperclad graphite rods for hotter and better arc cutting and arc gouging, their traditional applications for arc welders (also called, "copperclad cutting rods" / "copperclad welding rods"). These copperclad rods also make great graphite-copper electrodes for electroplating and similar uses. And copperclad carbon rods can serve as temporary grounding rods, as power busses for high currents, for other high voltage arcing applications, and for numerous useful and fascinating engineering applications, scientific applications, science projects, and magic shows (e.g. high-voltage arc discharging). They can also be used for crafts projects, jewelry projects (e.g. interesting tube beads, and to make stand-offs and roller wheels). These carbon copper-clad rods are top quality - not the cheapo carbon cutting rods seen advertised elsewhere. We also sell these in 25 and 50 quantities - see my webpages.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.

BUYER: Order by Title (below image) - Email us your order. - List History:
(10) COPPER CLAD RODS: LD049, LR097-S01, LR098-S01, LR099-S01, LR101-S01, LS092-R05. - Price: $19.95
(50) COPPER CLAD RODS: LD049, LS092-R05. - Price: $44.95.

-
SMALL LABORATORY OVEN / HEATER
OLD CURLING WARMER / HEATER
VERSATILE - GREAT FOR MANY USES!

Used and works great. Small oven/heater originally designed to heat cordless curling irons (we also sell cordless curling irons). Many people don't feel safe using an electrically-powered curling iron to their wet or damp hair for fear of electrocution - old-style non-electric curling irons may be coming back. Also great for many other types of heating uses from science or chemistry laboratory heater, to heat shrink tubing shrinking, to baking small pottery, to heating cutting and punching tools, for woodburning crafts, to thermally test electronic circuits, for numerous branding uses, as a temporary local area heater, etc. The guy we bought it from used it to heat his (aluminum-wrapped) burritos for his lunches at his desk. Note that the right photo was taken from below, and the stand that appears to go across the middle of the oven opening actually is level with the bottom of the opening and is used as the curling iron rest when the iron is inserted inside the oven. The front oval opening is 3" x 1-1/2". 115 VAC / 115 VDC power, 437 watts. Made by Lawndale Products, Inc., Model S.H.1. Caution: This oven gets very hot, so do not handle it when On, and do not use it near water.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $99.95. S/H: $9.90.


(3) PLASTIC HANDLE MOLDING /
FORMING IRONS (Similar to Curling Irons)

Used in very good working condition. Three different sizes - 5/8", 1", 1-1/8" diameters. These look like hair curling irons and are probably even usable as hair curling irons. However, they are high-quality, sturdily-built industrial equipment used to shape, mold, form or curl plastics, soft metals in sheet, cardstock, ribbons, etc. either cold or hot (depending on material shaped and end application). They are not connected to electricity. They are heated in a fire, or preferably, in a curling iron oven / curling iron heater (see above). Can also be used to apply labels, logos and brands. Can also be used as holders, especially for extending tubing and pipe into fires, chemical baths, securing round glue jobs, etc. And for expanding out rubber and plastic tubes or preventing them from collapsing.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $39.95. S/H: $9.90


10" HEAVY-DUTY 1" DIAMETER CURLING IRON

Used, works great. 10" curling iron, 1" diameter, heavy-duty.

UNIQUE ITEM. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $19.95


VINTAGE ELECTRICALLY-POWERED COMB

Vintage electrical comb. Used and works great. High quality. The comb part is brass, so it heats up fast and maintains the heat. While it was probably originally designed to comb human hair, we do not recommend it for that use. It is great for combing, separating and heat-treating fibers for crafts and hobbyist uses.

UNIQUE ITEM. We have only one of this Item left.

BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $29.95.

-
LARGE DELTA SCROLL SAW

Used, motor and mechanism works, but incomplete. Large Delta Scroll Saw. Can't find make and model (boiler plate is missing). This is a heavy, industrial-grade, commercial-type scroll-type saw. Can also probably be modified to do sanding, grinding and polishing as well, or even pounding, hammering, shaping, pulverizing, mixing, shaking, vibration testing. It has a tube feed assembly, so it was probably used to disperse coolant while cutting metals. We are selling it cheap as we do very little heavy-duty scroll sawing, and we have other lighter scroll saws for cutting things like PC boards, perf boards and plywood. The motor alone is probably worth more than $50.

LIMITED QUANTITY. We have only one of these.

BUYER: Order by Title (below image) - Email us your order. - List History: LD138. - Price #1 - Entire Power Tool) (as shown in above image): $79.95, S/H: $14, 60 lbs & 25 lbs (2 packages: Frame in one, Motor in other). Price #2 - Motor Alone (we remove and ship the Delta motor and then throw frame away): $49.95, S/H: $8, 25 lbs.

Return to TOOL CATEGORIES

FOOD POWER TOOLS / ELECTRIC TOOLS: Restaurant Tools, Kitchen Tools, Barbeque Tools:

-
LARGE TILIA FOODSAVER II VACUUM SEALER /
FOODSAVER VACUUM SEALING SYSTEM, w/ CUTTER

Used and in great condition, a few scuff marks on finish (both vacuum and thermal cutting tested). Tilia Foodsaver II, vacuum plastic bag sealer. 19.5" wide, with built-in cutter. 115VAC, works on both 60 Hz and 50 Hz (great for both USA and many foreign locations), 3.8A. This is the big one - not only capable of sealing large food bags, but also larger plastic bags for clothes, fabrics, collectibles, tools, equipment, parts, materials, toys, books, works of art, photographs, inventory, flowers, etc. This Tilia Foodsaver II has an external port that you can use to apply vacuums to other items, such as jars and vacuum chambers. Great for the kitchen and shop, and for moving, storage, camping, and travel preparations. Virtually all Tilia Foodsavers sold today are the small Foodsavers models, limited to small bags. This Tilia Model Foodsaver II sealer does not include any plastic bags - you can get them Online and some stores, and many non-rolled plastic bags will do as well. Very useful, industrial-grade, made in Italy.

LIMITED QUANTITY. We have only one of these left.

BUYER: Order by Title (below image) - Email us your order. - List History: LD111, LD121. - Price: $19.95. S/H: $8, 10 lbs.


POWER SEAL PRODUCE BAG SEALER,
SEALS TRASH BAGS, PARTS BAGS, GIFT BAGS, etc.

Great for sealing plastic bags of all types, including grocery bags (produce bags), trash bags / garbage bags, newspaper bags, candy bags, parts bags, gift bags, inventory bags, collectible bags / laundry bags, etc. - bags of many types and virtually all sizes. Can also be used to produce tape segments to write on, for example, to identify packages, boxes, plastic bins, crates, medical supply bags, etc. You can use use it to seal other items to, such as small boxes, envelopes, etc., including as a Christmas sealer / gift package sealer, and to attach notes to things. Virtually endless and important uses for the home, hobbies, crafts, sewing, shop, office, retail business, assembly line, field, construction site, camping/fishing/hunting/hiking. You absolutely must have one of these for every one of your major locations and functions. Industrial grade - rugged steel construction - this is not one of those cheapo bag sealers made of plastic or flimsy metal you get from a big discount store - but one designed and built for industrial applications. We bought several of these at an estate sale, not all came in the original box so the box itself may not be included. You get the sealer, plus one new full roll of red tape. Model 7605.

LIMITED QUANTITY.

BUYER: Order by Title (below image) - Email us your order. - List History: LD099, LR100-S01. - Price: $17.95. S/H: $9.90


MIRRO ALUMINUM PRESSURE COOKER /
ALUMINUM MIRRO COOKER /
ALUMINUM MIRRO PRESSURE COOKER,
12 QUART w/ PRESSURE REGULATOR

Used, in good condition and clean, with pressure regulator. High quality and heavy-duty construction. Our children have all graduated from college and flown the nest, so we no longer have a need for large kitchen equipment, including pressure cookers. As opposed to many Online ads for used pressure cookers, steamers, etc. that deceptively use photos of new pressure cookers from Online commercial ads, the images herein are of the actual pressure cooker you will receive.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $39.95. S/H: $11, 11 lbs


RIVAL ELECTRIC FOOD SLICER, MODEL 1101E/7

Used little and in great condition. Stainless steel Rival Electric Food Slicer, Model 1101E/7. We bought this food slicer new and used it for a Christmas dinner for 5, it worked great, but we can't find permanent room in our modest kitchen to keep it. Robust and stable, this Rival Electric Food Slicer model is great for sliced bread, sliced meat and sliced cheese. Comes with unit as shown, and stainless steel slide and booklet (not shown). Motor is 125 watt (50-60 Hz, 120VAC). Blade is 6-1/4" diameter stainless steel. 14-1/2 x 9-1/2 x 9-1/2.

BUYER: Order by Title (below image) - Email us your order. - List History: LD111. - Price: $49.95. S/H: $9, 11 lbs

Return to TOOL CATEGORIES


HIGH-TECH EXPERIENCED PROFESSIONALISM: Many "high-tech business" owners and their employees today are clearly woefully ignorant of the high technologies they sell (including some giant electronic parts houses!). ABQ Techzonics of Albuquerque, NM, USA, is owned by John J. Williams, M.S.E.E. Mr. Williams is a former Senior Electronics Design Engineer (Lockheed EMSCO); Professor of Computer Science (New Mexico State University (NMSU)); Electronics Weapons Design Engineer (U.S. Navy, U.S. Air Force); Health Physicist (National Institutes of Health (NIH)), etc. Williams is also currently President of Lone Star Consulting, Inc. and CEO of Consumertronics.net. While we don't know everything about everything tech (no one does), we have a high level of expertise. We sell a lot of electronic components / electrical components. Most of these electronic components / electrical components are small electronic parts / electrical parts, such as integrated circuits, optical devices, transistors, rectifiers, diodes, transformers, inductors, capacitors, resistors, displays, switches, relays, crystals, oscillators, transducers, sensors, prototyping, connectors, fuses, wire/cable, power components, etc., as well as some larger electronic parts / electrical parts and electronic test equipment, scientific equipment and industrial equipment / parts, electrical equipment / electronic equipment in general, tools, mounting hardware parts, and special materials. And we also buy and trade these types of items (Trade & Buy Offers). And unlike most electrical / electronic components sellers, many of the electrical / electronic component, etc. lots we buy we set aside some of the electrical / electronic parts, etc. for our own electronic projects and research. We sell those electrical / electronic parts, etc. we don't use. Our suppliers know that if their electrical / electronic parts, electronic test equipment, etc. aren't excellent, good chance we will discover it and they'll hear about it!

ABQ TECHZONICS (Albuquerque, NM) SELLS, BUYS & TRADES: ELECTRONIC COMPONENTS, ELECTRONIC PARTS, ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Thermistors, Crystals, Oscillators, Sensors, Transducers, Optoelectronics, Prototyping, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, RF, Microwave, Electronic Modules, Power Adapters, Power Supplies, other Electronic Parts / Electronic Components / Electronic Subassemblies / Electronic Assemblies. EQUIPMENT, DEVICES: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Mechanics Tools, Precision Tools, Tool Chests. MORE TECH STUFF: Commercial/Industrial/Scientific/Laboratory Valves, Fittings, Hardware Parts, Mechanical Parts, Supplies, Special Materials, Personal Security, Survival (Survivalists / Preppers), Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Books, Manuals, Software, Collectibles.

SOURCES OF ITEMS ABQ TECHZONICS SELLS: Surplus, online auctions, hamfests, private sales, business moving sales, overstocks, job lots, wholesale lots, estate sales, garage sales, thrift shops, charity auctions, flea markets, hardware trades, abandoned storage, lost & found property sales, discontinued items, obsolete items, warehouse inventory updates, excess inventories, liquidations, business closures and out-of-business sales, foreclosure sales, bankruptcies, government auctions / government sales, new salvage sales, and other sources for integrated circuits (ICs), electronic parts / electronic components, hardware, special materials, etc., Albuquerque, NM area preferred but will buy from anywhere. ABQ Techzonics is both a wholesale sellers/wholesale traders/wholesale buyers and retail sellers/retail traders/retail buyers, largely depending on quantity.


       IMAGE SPONSORED BY:
 Consumertronics
 Lone Star Consulting, Inc.
 ABQ Techzonics
       REPRINT POW-MIA IMAGE=>
             ON YOUR WEBSITE


NOTE: By policy, we never recommend for or against, approve or disapprove, sponsor, endorse, support, guarantee, or take any responsibility for any of the content of any non-Consumertronics webpage, website, advertisement, publication or other statement EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. And by policy, we never recommend for or against, approve or disapprove, sponsor, endorse, support, guarantee, or assume any liability or any other responsibility for any non-Consumertronics company, product or service EVEN IF WE HAVE PROVIDED A HOTLINK TO IT and EVEN IF WE HAVE DISCUSSED IT OR INFORMED YOU ABOUT IT on a webpage, or by phone, email, mail or fax, or by any other means of communications. Everything we sell is sold strictly for legal utility, educational and/or entertainment purposes only, and is based on our policies on our policies.htm webpage.
Test Source Links only (no visitor use): Source-1, Source-2, Source-3, Source-4, Source-5, Source-6, Source-7, Source-10, Source-11


NOTE: Money Transfer Services (MTS) and all business names referred to on this website (other than ABQ Techzonics and Consumertronics) are referred to only as totally independent sources of services or products our Clients may avail themselves to if they so choose, and to identify the manufacturers of products sold herein (e.g. "Radio Shack scanner"). These businesses have identities protected by their own unique trademarks and service marks. We are not in any way agents nor representative of them, nor in business with them (e.g. we are not a MTS, nor outlets nor franchises of them). Nor do we state or imply in any way that these businesses are a part of ABQ Techzonics nor Consumertronics, nor do they endorse nor support any ABQ Techzonics or Consumertronics product, service, policy, activity or operation. Nor do we state or imply in any way that ABQ Techzonics or Consumertronics are a part of these businesses, nor do we endorse nor support any of these businesses products, services, policies, activities or operations.

Site Map