ABQ Techzonics Trades Hand Tools,Carpenter,Plumber,Appliances-more

ABQ Techzonics Earthshaking Online Tech Superstore
We Seriously Consider all Reasonable Best Offers, Price Negotiations, Trade Offers!
We are Your Perfect One-Stop-Shopping Superstore to Fill Your High-Tech Parts Lists!

HAND TOOLS (non-electric tools), MANUAL TOOLS:
OTHER TRADES TOOLS: Carpenter Tools, Plumbers Tools, Appliance Repair Tools, Sheetmetal Tools, Welding Shop Tools, HVAC Tools, Builder Tools, Construction Tools, Drywall Tools, Furniture Tools / Upholstery Tools, Cabinet-Making Tools, Glass-Making Tools, Shoe Shop Tools, Landscaping Tools, Farming Tools, Ranching Tools.

HAND TOOLS / MANUAL TOOLS CATEGORIES
(Most Tools fit multiple Tool Categories - please check all applicable Categories, or use Search Box on top right)
OTHER TRADES TOOLS: Carpenter Tools, Plumbers Tools, Appliance Repair Tools, Sheetmetal Tools, Welding Shop Tools, HVAC Tools, Builder Tools, Construction Tools, Roofing Tools, Concrete Tools, Drywall Tools, Furniture Tools / Upholstery Tools, Cabinet-Making Tools, Glass-Making Tools, Shoe Shop Tools, Landscaping Tools, Farming Tools, Ranching Tools, Police Tools, Firefighter Tools, Military Tools.

SEE OUR SUPERSTORE webpages FOR: ELECTRONIC COMPONENTS / ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Crystals, Oscillators, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, Power, other Electronic Parts / Electronic Components. EQUIPMENT: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Tool Chests. MORE TECH STUFF: Scientific/Industrial Valves, Fittings, Security, Survival, Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Collectibles - Hardware, Devices, Parts, Special Materials, Books, Manuals, Software

Consumertronics.net, P. O. Box 23097, Albuquerque, NM 87192
(8400 Menaul Blvd, Ste Suite A-199, Albuquerque, NM 87112)

Contact: wizguru@consumertronics.net
Voice: 505-321-1034 (9-5 MST, M-F)
Please EMAIL US for all Orders, Inquiries and Questions

NOTE: We buy and collect many antique, vintage, unusual, weird, laboratory and precision tools and equipment in new and very good used conditions, of all types but particularly those useful for electronics and small work. Should you have any such tools and equipment you want to sell, please let us know by email - describe make and model, description, condition, and if possible your price.

SEARCHING FOR ITEMS: Items are enterred in this webpage mostly based on order we obtain them. Please use top-right search box or your Browser Search / Find feature to locate the specific Items of interest or just browse webpage. We listed many Items by more than one name and name variation (e.g. "punch", "dimpler"). If you can't find Item on webpage, try by other name variations, and then by function and functional variations, then search our other likely webpages, see SITEMAP for links.

ITEM CONDITIONS: Unless otherwise indicated, all items described on this webpage are new old stock (NOS) and never used. We often buy and trade for new electronic parts, electronic test equipment, and other items of the types described herein, preferably in larger quantities, some which we set aside for our own electronic laboratory, shop and other inventories and some we resell herein. Should you have items to sell or trade of these types, please let us know via email. All small parts and materials we acquire for resale herein must be new, but we often buy and trade for used large parts, tools, equipment and books in very good conditions, which we describe as "used" for those we resell. Please email us (please don't call as we are often in our labs), use email Subject: "Buy/Sell/Trade Inquiry."

DESCRIPTIONS & IMAGES: Unlike many Online stores, our goal is to always provide you clear and correct item images, and accurate and reasonably complete item descriptions. While we have tried to be 100% accurate in our descriptions and images, please freely let us know of any errors or omissions made herein, for example, by emailing us URLs to relevant datasheets. While images usually help, most of the items we sell are already well known. If any of our descriptions or images are missing, incomplete or inaccurate and this affects your purchase decision, please email us (please don't phone; put "Need Better Info for Item" in email Subject Line) so we can make reasonable corrections.

POLICIES: Unless explicitly stated otherwise on this webpage, all applicable policies are found at: www.consumertronics.net/policies.htm.

PAYMENTS: We accept checks, money orders, PayPal (PP), Western Unions (WU), MoneyGrams (MG), trade and cash. Simply email us (wizguru) a list of what you want (Title, name or part # of each choice), include the prices with S/H, and your name, shipping address and preferred payment method, or use one of our Consumertronics Online Order Forms. We ship within 2 work days after full payment clearance period from day of deposit. All payments must be made in $US - no Canadian dollars or Australian dollars. Details below:
     (1) FASTEST SHIPPING: U.S. Postal Money Order (PMO), Canadian PMO (made out in $US), WU, MG, PP and cash are considered to be same-as-cash by us - clearance period is zero days. Note: We are not responsible for cash sent in the mails, so conceal well.
     (2) MOs & CHECKS DETAILS: Pay to: "Consumertronics". ALL NON-PMO MOs & CHECKs: Clearance period: 10+ days if $20-$100, 20+ days if $101-$250, 30+ days if over $250.
     (3) WU & MG DETAILS: Pay to: "John J. Williams" (due to fact that using WU or MG to pay to a business name is usually a major hassle). All WUs and MGs over $500 require prior written approval by us. While most WUs and MGs arrive here within hours, they sometimes takes days.
     (4) PP DETAILS: Pay to: "wizguru@consumertronics.net". All foreign PayPal over $100 and all non-foreign PayPal over $300 require prior, explicit, written approval by us; and all PayPal over $50 requires verifiable name, address and phone #.
     (5) ITEMS FOR TRADE DETAILS: Who doesn't want to save cash these days! We do accept Items of Trade. By doing Items For Trade, you save money and get rid of good Item(s) you need less than Items we offer. Prior explicit permission from us is required before you ship to us any Item for trade. If interested, email us (wizguru, put in email Subject Line: "Item for Trade Inquiry.") with full details of what you have to offer and what you want for it (you must have sole and exclusive ownership of all Items you offer to us for trade). Include complete description of all Item(s), including Item make and model/part numbers, conditions, quantities, defects. Please do NOT phone us about Items of trade. If interested we will email you back with conditional acceptance or a counteroffer. If mutual acceptance results, we will then email you our permission to ship the Items, which you do at your S/H expense. Once your trade Items arrive here, we will examine them, which usually takes 3-20 days. If acceptable to us, we will ship (at our S/H expense within 2 work days) what we had agree to trade to you. Note: We do not want old TVs,VCRs, home systems, computers, monitors or peripherals or big, heavy items, and all items must be clean and safe to ship and handle. Again, don't ship us anything until you receive our written explicit approval to do so.
     (6) PAY EXACT FULL AMOUNT: Please pay the exact full amount of your purchase + S/H (email us if you are not sure). If you overpay us by more than 5% or $100 (whichever is less), allow 90-120 days for us to refund you the difference.
     (7) UNACCEPTABLE ORDER TYPES: No credit cards, CODs, partial payments, postdated payments, "on approvals" or any other types of payments or shipment not explicitly OKed herein or by us in writing prior to payment. Furthermore, we reserve the right to refuse any order, form of payment, or buyer-imposed sale or shipping conditions without liability to us. For our good buyers: We are more flexible in types of payments and shipping conditions. FOREIGN BUYERS: Some items may be restricted by government regulations for export, and Buyers assume all liability for the legality of our shipments to them and their purchases, possessions and uses of the items we ship to them.

PRICING: We are flexible in our prices and S/H - especially for our good customers and for quantity and multi-item orders - we want to be fair to both you and us. Prices are stated below Item Description. We determined Item price based on prices of similar items found Online and in stores. In cases of no clear Online or store price consensus, other sources were used. If our price is too high for any item we sell, we will seriously consider reducing our price - especially if you document that others are selling this same or equivalent item at lower prices in the quantity you need - our goal is to beat our competitors! For many items, we are not limited to the quantities shown - should you need more and we have what you need available, we will seriously consider your offer. By buying an item in quantity and/or more than one item, you much reduce your S/H costs per unit. In most cases we can also do less quantity if your total order is $10+ (+S/H) and average price of your items is $5+ each. Just email us with your needs, your counter-offers, and/or items you want to trade.

SPECIAL DISCOUNTS: Until ___________, 20___, you may take _______% off of the price of any and all Items described on this webpage in which the word "Firm" does not appear next to the price.

SPECIAL QUANTITY DEALS SAVES YOU MONEY: Larger quantity (and multiple Item and local pickup and delivery) sales almost always result in per-unit $Item-plus-S/H savings for YOU! We have some Items in much larger quantities than offered above as usually stated in Item description. Yes, if we have the quantity to meet your higher quantity needs, we will seriously consider any reasonable and mutually fair offer you propose which will not only get you the quantity you need but at a substantial savings to you in per unit price and per unit S/H costs (quantity evenly divisible by 10 or 25). We will seriously consider underselling all other major sellers of the same items.

SHIPPING & HANDLING: Where S/H is stated, it is stated for CONTINENTAL USA ORDERS. Shipping part of S/H is based on actual Shipping charges. Where S/H is not stated, the following S/H charges apply:

FOREIGN ORDERS: Please inquire. Minimum foreign Air Mail S/H is $14.90 Canada, and $22.90 all other foreign addresses, so please order as much as you can to save substantial foreign S/H.

MULTIPLE ITEMS SAVE YOU MUCH S/H CHARGES!: We are your perfect one-stop-shopping Super Store for high-tech parts to fill your parts lists! S/H is now expensive and shippers are constantly increasing their rates; to save YOU much in S/H, please order all that you need from us today from this webpage and all of our other webpages, pay for them all in full in one payment to be shipped all together to same address. ALL USA & CANADA ORDERS: You pay full S/H for your most S/H-costly Item plus half S/H for each and every other Item you buy. ALL OTHER FOREIGN ORDERS: Please inquire.

SHIPPING METHOD: For USA, we usually use Priority Mail or Media Mail (if book or manual) if Shipping charge is less than 75% of the S/H stated above. All foreign Shipping is by Air Mail. Other forms of USA shipping, including UPS, FedEx, Overnight, Second Day Air, Insured, etc. are usually OK but the S/H will be higher. We will not charge shipping to Buyer's shipper account.

ANTISTATIC PACKAGING: All Items which are electrostatically sensitive (e.g. CMOS, FET, MOSFET or otherwise known to be static electricity sensitive) are shipped in antistatic tubes, antistatic foam, antistatic reel tape, antistatic tray, and/or antistatic bag.

Thanks for visiting our ABQ Techzonics website. Best of successes. John J. Williams, M.S.E.E., Consumertronics.net

OTHER TRADES TOOLS: Carpenter Tools, Plumbers Tools, Appliance Repair Tools, Sheetmetal Tools, Welding Tools, HVAC Tools, Builder Tools, Construction Tools, Drywall Tools, Roofing Tools, Concrete Tools, Furniture Tools / Upholstery Tools, Cabinet-Making Tools, Glass-Making Tools, Shoe Shop Tools, Landscaping Tools, Farming Tools, Ranching Tools, Police Tools, Firefighter Tools, Military Tools:

VERSATILE MAESTRO CLAMP-ALL SYSTEM, M1201
w/ 4 CLAMP RINGS + HOW-TO MANUAL
EXPANSION TOOL / SPREADER TOOL / SEPARATOR TOOL

New old stock (NOS). Versatile Maestro Clamp-All System, M1201, with 4 Ring Clamps and How-to Manual. The Maestro Clamp-All System serves as an expansion tool / spreader tool / separator tool primarily used to expand spring-like C-type clamps to secure the clamps onto various objects you need to secure or work on. The Maestro Clamp-All System is about ideal for clamping many different kinds of objects together, including mouldings, picture frames, laminations, furniture repair, and many other assembly and repair jobs being glued, nailed, screwed or soldered. Can also be used to stretch and open elastic bands of various sizes, and to straighten 1/4" or smaller pipe and rods. How-to Manual is not lengthy but describes various commonly available objects in which you can derive both clamping rings of various diameters (e.g. the 4 rings we provide were made by us, see image) and strong, long-lasting elastic bands of various sizes and strengths you can cut to the widths you want (Note: The Maestro-made rings of various sizes can also be bought commercially). Great for general home repairs and shop repairs, crafts, model making, clock repair / watch repair, jewelry work, and for bundling rods, pipes, tubes, cables, wires and other objects together.

One big advantage with the Maestro Clamp-All System, M1201, especially for field work, is that for jobs which require multiple clamps, all you need is one Maestro tool and a handful of clamping rings - no more hauling around a box full of clamps - compact and efficient to use and store. A second big advantage of the Maestro Clamp-All System is that it clamps many types and shapes of items together, including odd-shaped objects and objects coming together at unusual angles - works in places and on jobs other clamps simply cannot touch - especially nice for craft work. A third big advantage of the Maestro tool is that it works fast (no more tedious screw clamps). A fourth big advantage of the Maestro tool is that it not only works great with its clamp rings, but also with elastic bands ranging from store-bought rubber bands to the cheap-to-make but very strong elastic bands our How-to Manual tells you how to make.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD145. - Price: $39.95, S/H: $7.90.

Used and in very good condition. Rare Vintage Stanley Plane, No. 9-1/2 (Stanley Wood Block Plane / Stanley Block Plane / Stanley Wood Plane). Appears to be 100% complete. Made in USA. Great collectible! And very useful.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD145. - Price: $24.95, $6.90 S/H.

BABCOCK DRILL REVERSIBLE 5-TO-1 SPEED REDUCER
VINTAGE BABCO DRILL SPEED REDUCER, No. 825
+ USER MANUAL + WOOD BOX

Used and in very good condition. Babco No. 825 Vintage Babcock Drill Speed Reducer, Reversible 5-to-1 Drill Speed Reducer, with User Manual and Wood Box. Can be locked into reversing position. By reducing drill speed by a factor of 5, you increase drill torque by a factor of 5. Can be used with drill press or hand power drills from 1/4" and up. Industrial grade heavy duty. This Babcock special tool is really great where you need slower rotating drilling, especially tapping.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD143. - Price: $34.95, S/H: $9.90.

Used and in very good condition. Rare, Vintage Steel Sexauer Plumbing Tools with Original Steel Box. One tool looks like some kind of faucet tool or tube tool for 3 sizes. The other tool looks somewhat like a bullet mold, but is some type of tube holder, tube shape restorer or tube crimper. With decades of collecting rare, vintage, antique and precision tools, this is the first one of these we've run into. Great collectible, or tools can be used as is, or tools can be modified to fit your other uses.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD145. - Price: $99.95.

Used and in very good condition. This Rare Neva-Clog Stapling Pliers do not have a model number stamped on them, which likely means that they are much older than the Model B-100 or Model S-100. This also means that we have no idea how to price it, so we tried to price it low for our Buyers.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD145. - Price: $39.95.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD145. - Price: $29.95, S/H: $7.90.

New old stock (NOS). The Speed Corporation Circular Saw Sharpener Jig, plus User Manual. All metal construction. Simple and fast to set up and use for this fine circular saw blade sharpener. Accurate and consistent filing. Circular saw blades must be frequently and accurately sharpened for fastest and safest sawing results. Very versatile - this Speed Corp Circular Saw Sharpener model works on crosscut blades, rip cut blades and combination circular saw blades from 6" to 12" diameter, with 1/2", 9/16", 5/8"and 3/4" arbor holes (one bushing shown mounted, other 3 bushings are shown tied to end). These bushings have other useful tool uses beside with this Speed Corp Circular Saw Sharpener tool.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD143. - Price: $39.95, S/H: $9.90.

Used and in very good condition. Vintage steel EDMA Profil 2 RM Sheetmetal Punch and Setting Tool Frame Pliers, 12-9/16" long, 2-1/4" wide. Made in France. EDMA is famous for its high quality sheetmetal nibblers, punches, setting tools, etc. The EDMA Profil 2 RM frame pliers is a section setting tool. These EDMA Profil metal frame pliers quickly and efficiently punch and set rails and studs in drywall installations. These EDMA frame pliers allow you to work as close to the wall as possible - no screws or anchors needed.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD140. - Price: 74.95, S/H: $14.90.

VINTAGE STANLEY BUTT MARKER, NO. 373-1/2
3-1/2" WIDE, DOOR HINGE, CUTS DOOR JAMBS & DOORS

Used and in very good condition, plastic pouch is worn. Vintage steel Stanley Butt Marker, No. 373-1/2, width of 3-1/2". Used to fast and easily cut both doors and door jambs for 3-1/2" wide door hinges. Simple operation: (1) Draw outline of your door hinge on door edge and door jamb. (2) Place the Stanley Butt Marker over each outline. (3) Hit Stanley Butt Marker with hammer until it is fully seated, then remove Butt Marker. (4) Use chisel to remove wood stock from within the Butt Marker cut area - result should be a very sharp, clean and professional hinge cut-out area. (5) Install door hinge.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD141. - Price: $10.45.

RARE K. VOM STEIN WUPPERTAL PIPE WRENCH, 5120-12-140-5443
HEAVY-DUTY, INDUSTRIAL GRADE PIPE WRENCH

Used and in very good condition. Rare K. vom Stein Wuppertal Pipe Wrench, #5120-12-140-5443. Very high quality, heavy-duty, industrial grade pipe wrench. Also great because this K. vom Stein Wuppertal pipe wrench is a combo smooth jaw and serrated jaw pipe wrench - no more having to reach for another wrench when under the sink! To set for smooth jaw, slide the center piece all the way up. To set for serrated or rough-gripping jaw, slide the center piece all the way down. This pipe wrench also has built-in cutter. This rare K. vom Stein Wuppertal pipe wrench is not only a great tool but also a great collectible. Both very useful and a great collectible wrench. 12-3/4" long (max jaw opening of 2"). Jaws are 11/16" wide.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD142. - Price: $495.95, S/H: $9.90.

RARE HEAVY-DUTY SP SYKES-PICKAVANT
COMPRESSION TOOL / HAND PRESS / CLAMP
CAR DOOR SKINNER TOOL / VISE, No. 043100

Used and in very good condition. Rare heavy-duty, industrial grade SP Sykes-Pickavant Hand Press, No. 043100, Made in England. While designed to be a door skinner tool, the SP Sykes-Pickavant Tool is great for bending, folding, flattening, twisting, pulling, positioning and carrying sheet metal - even heavier gauges of sheet metal. The black part is a replaceable hard plastic block. You can make any kind of block, die or form you want that fits there out of metal, plastic or wood - for example, this SP Sykes-Pickavant press / compression tool is also great for embossing your logo onto a piece of sheet metal, plastic, wood or cardstock. Great leverage - amazing compression forces. This SP Sykes-Pickavant compression tool is practically unbeatable for pressing, compressing, bending, mashing and crushing objects. 12-1/4" long, 1-3/4" tall, 1-1/4" thick at head. Cube-shaped head.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD142. - Price: $249.95, S/H: $9.90.

Used and in very good condition. Rare, heavy-duty, industrial grade steel Adjustable Spanner Wrench for barrels and drums. This spanner wrench has two twist and lock slots (bayonet slots, recessed slots). Head rotates 360 degrees. This wrench tool can be used as shown or modified for many other practical uses. Head diameter (ID) is 1-3/8", head wall thickness is 1/8", two locking slots are 5/16" wide. 10" long, handle is 6" long, 1/2" diameter, covered in plastic.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD142. - Price: $49.95, S/H: $9.90.

Used and in very good condition. Rare Forester Hose Shut Off Clamp, Western Fire Equipment Co., Cat. No. 14X670, fire hose shut-off clamp (hose clamp). Opening is 4" long. We added plastic to the handles for greater grip and leverage, and for thermal and electrical insulation. This Forester Hose Shut Off Clamp allows for a great leverage to be applied. Yet, it is very compact when folded, and light weight (made of an aluminum alloy, except clamping ring is brass and pins are steel). Not only very useful but also a great collectible. 10" long folded.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD142. - Price: $195.95, s/h: $7.90.

ANGLE BENDER / ANGLE CLAMP
UNIQUE,UNUSUAL,VERY USEFUL,VERSATILE
(from Modified AMP Crimper)

Used and in very good condition. Unique, very useful tool. Great for both bending, clamping and fabricating 90-degree angle brackets. This is an angle bender / angle clamp made from a modified Amp crimper. 1/8" thick steel 1" angle iron are brazed onto the jaws as shown. By inserting a strip of sheet metal into the jaws, you can bend it into a 90-degree bracket. This is also a great tool if you need to attach two angled pieces, lapping one over the other for drilling, punching, riveting, screwing, cementing, etc. The Amp crimper was chosen because of the great leverage it has. Angle clamp is 9-3/4" long.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD142. - Price: $49.95, S/H: $9.90.

Used and in very good condition. Steel Imperial Eastman Gripping & Holding Tool. Will tightly grip and hold round, hexagonal, or odd-shaped objects from about 1/8" (middle image) to about 3/4" dia. (left image). Especially effective on nuts and plumbing fittings which have deformed heads from previous bad wrenchings. Great for heads that you don't have wrenches for. Gripper aperture control works similar to a camera shutter aperture control (f-stop, camera iris). Saves much time, frustration and scraped knuckles. Compact and strong, body (excluding handle) is about 4" x 1" x 1".

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD140. - Price: $49.95

Used and in very good condition. Klenks Laminate Cutters, DA75570 / DA 75570. Great for cutting laminated materials, including laminations used on kitchen sink tops, as well as other plastic materials and rubber materials, such as a vinyl cutter, linoleum cutter or rubber sheet cutter.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD138. - Price: $19.95. S/H: $7.90

ADJUSTABLE PRECISION THICKNESS GAUGE &
THICKNESS TOLERANCE GAUGE, "GO - NO GO GAUGE"

Used and in very good condition. Adjustable Precision Thickness Gauge and Thickness Tolerance Gauge. This type of gauge is often referred to as a "Go - No Go Gauge". Great for measuring the thicknesses of sheet metal, plate metal, sheet plastic, sheet wood and other objects which can be fitted underneath its hard steel anvils. On the boiler plate (above, left of "2" on left image), I can only read "Whitney" on top line and "West" on line below it (likely Pratt & Whitney). We bought it in a lot of aircraft tools, so also likely this thickness gauge / thickness tolerance gauge is an aircraft gauge. Maximum measured thickness and maximum tolerance thickness are both 1/2", minimums are both 0", and are independently set. This precision thickness tolerance gauge is 3" wide, 3-1/2" tall, 1/2" thick, made of steel. Most of the Pratt Whitney precision Go - No Go gauges of this type we have seen are very limited to measuring small thickness tolerances (e.g. 0.01"), and some are not even adjustable. And since this is a purely mechanical gauge, it never requires batteries, and you can keep it in your tool box with your thickness and tolerances solidly locked into place until you decide to change them. A great handtool for precision work, and also a great handtool collectible.
          How this thickness gauge / thickness tolerance gauge works is simple. In right image, note side screws just above the anvils (or plungers) and on top screws directly over the anvils. The anvils are independent of each other and individually adjusted. The side screws, when tightened, lock anvil positions so you don't lose a setting. The top screws are used to make the anvils descend to the levels you want to (side screws must be loose). Thicness and thickness tolerance testing are done easily and quickly.
          To measure thickness, you simply back off the top screws to the top of the tool as in right image. You then push up the anvils (side screws loose), same as left image. You then place the sheet, plate or stock underneath the anvils. You then screw down at least one top screw until its anvil gently rests on the top of the sheet, plate or stock. You then tighten its side screw. You then slide out the sheet, plate or stock, and use a caliper to measure the gap between anvil and anvil block beneath it, and that is your thickness.
          The real beauty of this tool is its precision thickness tolerance gauge feature for sheets, plates and stock you buy or make - why it is called a Go - No Go Gauge. For example, you bought a steel plate, and you need to verify that its thickness and thickness tolerance. What you do is first determine what thickness and thickness tolerance are acceptable. For example, your steel plate must be 10mm ±0.1mm, which means that your plate must be between 9.9mm and 10.1mm thick. You lift both anvils all the way to the top as before. You then screw in the back top screw until its anvil lowers precisely to the 9.9mm height, as measured by a caliper, and then tighten its side screw to lock it in. You then repeat this process for the front anvil but setting it for 10.1mm. You then run the gauge along the edge of your steel plate for its length. If the plate won't pass under the front anvil, the plate is too thick. If the plate passes under both anvils, then the plate is too thin. If the steel plate passes under the front anvil but not under the back anvil, your steel plate is within both specified thickness and tolerance.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD138. - Price: $299.95

Used and in very good condition. Rare Crease Gun (no - not Grease Gun - this is a Crease Gun - a crease removing tool / dent removing tool). Rugged, heavy-duty. Adjustable with many versatile uses, but generally used to remove or make creases or dents in sheet metal and flexible plastic, more specifically usually used to remove dents and creases from dented car bodies. This crease handtool has a similar action to a pop rivet gun - when you pull on the handle, the bottom bit chuck (bit holder part) pulls up, and with a great mechanical advantage, to pull up whatever the bit is gripping onto. This crease tool is adjustable for the initial height of the bit chuck from the bottom for different lengths of bits and depths of creases. To use the Richco crease gun to remove a dent or crease, you screw or insert the end of the bit through a hole in the middle of the crease. You then insert the other end of the bit into the chuck and tighten it down. You then pull the handle to pull up the bit and with it the dent or crease up against the plexiglass, thereby flattening the crease or dent to remove it.
This Richco crease gun has many other pull-type uses, depending upon the bit used. For example, it can be used to pull a screw, rivet, pin, standoff or wire through a tight hole. It can be used to bend a stiff piece of wire or thin stock. Great for the autobody shops, crafters, modelers, fabrication shops, sheet metal shops.
This Richco crease gun functionally works great. A plexiglass plate is added to the tool base as shown (which is attached by 4 screws and is easily removed or replaced with some other type of plate or forming fixture of your make or just left off), which much adds to its utility. About 1/3rd of the knob head is broken off and missing (not shown), but does not affect function. This Richco crease gun is 7.5" long. We don't know anything about availability of bits, we made our own proprietary bits, which are not included (no bits are included).

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD136. - Price: $99.95. S/H: $9.90.

ADJUSTABLE-HEAD CLAW HEAD HAMMER
ADJUSTABLE CLAW HAMMER HEAD /
ADJUSTABLE CLAW HEAD HAMMER /
ADJUSTABLE HAMMER HEAD - RARE, STEEL

Used and in very good condition; all functions are excellent, there is no visible rust and plastic on handle is in great condition and snug-tight. Rare high-quality steel Adjustable-Head Claw Head Hammer. We recently bought this adjustable-head claw head hammer at an estate sale (a year earlier, we bought another one exactly like this adjustable hammer also at an estate sale where the wife of the deceased stated that hammer's owner was a tool inventor, which we sold Nov. 6 on eBay for $995), so this adjustable-head claw hammer may even be an invention prototype, manufacturer's approval sample, or a (very) limited issue tool (we do not know how many were made or are still available). With decades of experience of buying unusual tools, we have found only three adjustable head hammers, including this one, all of this same type, all found near Albuquerque, NM, and we own this one and the one we have in our tool collection.
UTILITY: The claw hammer's head is easily and quickly adjusted. You simply push in the long black lever, and then position the head to the desired angle (of 3 angles), then release the lever, leaving the head rigidly and securely at selected angle. This adjustable-head claw hammer has outstanding advantages over standard non-adjustable hammers. In its traditional "T" head position, the hammer has all the uses of normal claw head hammers of this general size, shape and weight. However, with the head pointed up of this adjustable hammer, you can reach 2+ inches higher, and it also great for working on vertical surfaces (e.g. walls and fences), slanted-up surfaces (e.g. roofs), for nailing near the edge of a surface you don't want to accidentally hit or score (e.g. high up on a wall near a ceiling), for difficult ceilings and overhead work, and for nailing nails angled towards you. With the head pointed down, hammering on slanted-down surfaces (e.g. roofs), difficult underside surfaces, and for nails angled away from you. Of equal importance, when you pull nails or separate stuck boards using a claw hammer's claw, the angle of the hammer handle, along with your body's position, are critical to the amount of leverage you can apply (i.e. nail-pulling force / board-separating force). With this adjustable-head claw hammer, you can adjust head angle to much more easily, quickly and efficiently pull nails and separate stuck boards. For maximum leverage for pulling nails, the angled-up hammer head position is especially powerful where you are also pushing against the surface with the nails. This great increase in hammer efficiency means you can hammer or pull faster, more easily, and with less resulting strain, busted knuckles and 'aches-and-pains' at the end of your work day using this adjustable head hammer.
COLLECTIBLE: This is an incredible collectible hammer find! We can find no other adjustable head hammer anywhere. If you collect rare tools in general or hammers or claw hammers in particular, your collection will never be complete and always have a glaring deficiency without this incredible adjustable-head claw hammer as part of your collection! A real treasure and conversation piece!

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD142. - Price: $995.95, S/H: $9.90.

(2) INSULATED PRECISION PART HOLDERs /
EXTENDED ALLIGATOR CLIPs / MINI VISES /
MINI CLAMPs / MINI CLIPs / ROACH CLIPs, 3-1/4"

New old stock (NOS). Handmade Precision Part Holders / Miniature Clips / Miniature Clamps / Extended Alligator Clips / Roach Clips with Rubber Insulated Handles, 3-1/4" long. Because these extended alligator clips are heavily insulated with a thick form-fitting rubberized jacket (over the brass core), they insulate you thermally, electrically and chemically. Practically unlimited uses. Perfect for the electronics lab, chemistry lab, biomedical lab, scientific lab, forensic lab, crafts shop, modeling shop, computer shop, fishing tackle box, jewelry repair, watch repair / clock repair, for handling some precious objects (including gems), etc. Great for any application where you need to securely handle, manipulate, maneuver and position small objects, odd-shaped objects, slippery objects, objects not to be contaminated by skin contact, and objects unsafe or uncomfortable to hold in your fingers. Great for optimum viewing, polishing, sanding, grinding, drilling, machining, painting, plating, molding, soldering, connecting, cementing, testing and using. And tied to a line and hung upside down, these mini hand vises / mini hand clamps / mini clips can hold papers, photos, and small objects while they are being viewed, painted, cemented, etc. And they can clamp two small objects together, and hold things together either temporarily or permanently. These mini vises / mini hand clamps / mini clips can be hand-held or secured in a vise, clamp or test tube holder. These extended alligator clips are also great as heatsinks to both hold and protect electronic components when soldering their leads or tabs (by clipping onto or near the electronic part so that the excess heat conduction along the lead goes into the clip and not into the electronic part. Starting in the 1960s, devices like these were and are still commonly called, "roach clips," and were used to secure smokes so that the smoker could obtain maximum use of his/her smoke without burning fingers (tobacco products these days are very costly). Everyone needs at least a couple of these.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD135. - Price: $19.95

15" LONG-REACH LOCKING PLIERS
LONG NOSE VISE-GRIPPING LOCK PLIERS
SPECIALTY TOOL LONG CLAMPING PLIERS

New, in original package. 15" Long-Reach Locking Pliers, Handheld Long Nose Vise-Gripping Lock Pliers, Long Clamping Pliers Specialty Tool. Jaws: 1-1/4" max opening, 1-13/16" depth. Overall: 15" x 1-13/16" x 11/16". These extra long locking pliers are very useful for many difficult jobs, especially for working on cars, trucks and other vehicles, other machines, carpentry, construction, roofing work, and tree-trimming. Also great for picking up fallen heavier, non-magnetic, dirty and hazardous objects and fallen objects which fall or slide into hard-to-reach or hazardous spots (especially if bending down or reaching is a problem), and for grabbing, gripping, holding onto, carrying, turning, twisting and manipulating objects which you can't reach with other locking tools.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD133. - Price: $18.95. S/H: $7.90

Used and in very good condition. Vintage, Rare Swingline Stapler Remover, #96, all steel, Made in USA. Jaws 1-1/4" wide. Leverage is fantastic on this Swingline staple remover. This IS your Grandfather's staple remover. This is the mother of all staple removers! It even looks mean with its powerful oversized head and horrific teeth. This is not for staples that bind papers together, but for removing staples used in crates, heavy cardboard shipping containers and wood. Makes fast work of even your most subborn staples. Not just limited to pulling staples - can also be use to separate light-to-medium chain links (chain link separator), as well as other difficult-to-separate or spread objects, and can also be used for grabbing, grappling, carrying, biting through and shredding. Nice thumb grip on top and finger grip on bottom allows for much greater comfort at much higher force levels to be applied. Spring-loaded to open position, Swingline #96 staple remover is kept closed with nice catch on end of handle.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD138. - Price: $49.95. S/H: $9.90.

6" SLENDER JAW NEEDLENOSE VISE-GRIP PLIERS
IRWIN NEEDLE NOSE LOCKING PLIERS, 6LN

New Old Stock (NOS). Rare 6" Slender Jaw Needle Nose Irwin Vise-Grip Pliers / Needlenose Locking Pliers, marked 6LN, Made in USA, and with the standard side cutter. Please note that top left image is the mirror image of the other side of the pliers shown in bottom image to point pliers in the same direction as bottom image for aesthetic and comparison purposes. We have 20 of these Slender Jaw Vise-Grip locking pliers / gripping pliers with the unique slender needlenose jaws. We don't know whether they were made this way by the factory or machined by their former owner (most likely as there are minor variations between pliers, but there are also minor variations between factory-manufactured Vise-Grips; the pliers you receive may not be the exact same pliers as shown in the image). Typical of all Vise-Grip pliers, these are very high quality Vise-Grips. Compared to most foreign made similar gripping pliers, Vise-Grips have excellent jaw fitting and jaw closure reliability, and are much more resistant to bending, twisting, distorting, breaking and wearing out. These special thin-nose Vise-Grip locking pliers are absolutely great!
     Their slender needlenose structure has major advantages over similar standard-nose Vise-Grips and over every type of non-locking needlenose pliers:
          (1) Allows access to hard-to-reach places - tighter spaces and deeper places. Even if your Vise-Grip standard long-nose pliers can reach the work, these special slend nose Vise-Grip pliers provide you more space for positioning, placing, maneuvering, turning and twisting the part - your work gets done faster, easier and more reliably.
          (2) Because these Vise-Grip pliers nose is long and slender, it holds and grips parts (e.g. nuts, screws, washers, nails, pins, rods, hardware, etc.) better than the standard long nose Vise-Grip pliers and much better than non-locking needlenose pliers. Due to the much increased spring action of the slender needle nose, these pliers permit both greater force on the held object AND greater surface area of the jaws contact with the object, thereby distributing this greater force over a greater contact area - resulting in both tighter holds and less pounds per square inch exerted on the object, thereby increasing your hold while also reducing both marring and crushing probabilities. While many non-locking needle nose pliers also come with a long, slender jaws similar to these, but since they don't lock, they are much harder and less reliable to use than these special Vise-Grip needlenose pliers, especially if any kind of force is being applied to the gripped part. The result is better and more reliable positioning and less slipping and twisting of the held part. Also, by these pliers more firmly gripping the parts you handle, you are much less likely to lose parts by dropping them or by them slipping or twisting out of the pliers jaws. You know how stressful it is when you drop or lose control of a part - especially if its a valuable or irreplaceable part or under emergency conditions. If these Vise-Grip pliers can save you from losing even one such part or dealing with an emergency, they may have more than paid for themselves!

Great for electronics, mechanical work, crafting, model work, watch repair / clock repair, jewelry repair, gun repair, fishing, car/airplane/boat repairs, emergency repairs, general household uses, and every other application where precision, access to tight spaces, and/or reliable gripping, holding and moving are required.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD134. - Price: $39.95.

Used and in very good condition. Rare, antique Perfection Nut Cracker, Model 1928, Patented 1914, Waco, Texas. The T-handle is especially nice - comfortable and well-designed for hard clamping. Unlike almost all other nut crackers, this model has a threaded shaft and T-handle commonly found in vises and clamps to securely press against and hold objects. This Perfection nut cracker is modified with two large knurled washers firmly epoxied to the clamp faces as shown. These added washers increase the clamping surfaces for firmer clamps. Also, the 1/2" dia. washer holes better clamp round and odd-shaped objects. This added feature not only improves the Perfection nut cracker's ability to position and crack nuts without slippage but is also great for many other uses, especially unusual clamping needs. Further, the head that is on the threaded bolt end floats to some extent (built-in feature) to better hold odd-shaped objects (such as nuts) of just about any kind. Ideal vise or clamp for crafts shops, model shops, fabrication shops, gun shops, jewelry repair shops, and watch repair shops. And a great collectible (you can break off the added washers to restore Perfection nut cracker to original condition if you wish).

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD136. - Price: $49.95. S/H: $9.90.

Used and in very good condition. 7-Gauge Weld Fillet Gage Set, FibreMetal / Fibre-Metal Products Co. Practically required for all welders. Also very useful for measuring brazing fillets, solder fillets, caulking fillets, cement fillets, and glue fillets. Also useful for gauging the roundness of round stock, including dowel rod, trim, pipe and tubing, and wood routing.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD138. - Price: $19.95

Used and in very good condition. Panavise Vise plus Panavise Base. This type of Panavise vise is very useful, versatile and robust. Panavise vise rotates 360 degrees both at the vise and at the base, and from 0 degrees to 90 degrees up and down. Both the Panavase vise and Panavise base are interchangeable with many other Panavise vises and bases.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD136. - Price: $29.95. S/H: $15.90.

COX VBM200 / VBM-200 EPOXY CARTRIDGE CAULK GUN
VERSATILE DOUBLE-BARRELED COX EPOXY GLUE GUN

Used and in very good condition. Cox VBM-200 / VBM200 Epoxy Cartridge Caulk Gun, Epoxy Glue Gun, Double-Barreled, Cox glue gun. Heavy-duty, industrial-grade. Built like a very high quality single-tubed caulking gun, but double-barreled for twin-tube expoxy cartridges and with much high mechanical advantage. This caulking gun also fits standard-size caulking tubes. This means, that even if you don't use it for epoxy, you can use it for other caulking uses with the other many readily available types of caulking. This means that you can use this Cox VBM200 / VBM-200 as a double-barreled caulking system (double-barreled glue gun) where you can simultaneously lay down two beads of caulk and at the same time to double your caulking speed for larger surfaces (e.g. boards, plywood, wallboards), as well as to produce a uniform distance between the two caulking beads for maximum caulking efficiency. Or you use one barrel for a filled tube of caulk and the other barrel with an empty tube, and use the empty tube tip as a pointer to a guide or guideline reference so you lay down a caulking bead of uniform distance from your reference. And if you really want to get fancy, you can use this Cox VBM200 / VBM-200 with two different types of caulks at the same time.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD136. - Price: $79.95. S/H: $9.90.

(2) STANLEY #10-788 RETRACTABLE UTILITY KNIVES
ROOFING KNIVES / SHINGLE KNIVES / BOX KNIVES

Used and in very good condition. Stanley Retractable Utility Knives / Shingles Knives / Roofing Knives / Box Knives, #10-788. One has the razor blade, the other the hook-nose blade. They both work fine, although they have some dried roofing pitch on them. These Stanley utility knives are heavy duty utility cutters widely used by contractors.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD136. - Price: $19.95

Used and in very good condition. Malco C4 Sheet Metal Crimper / Downspout Crimper / HVAC Crimper / Gutter Crimper, 5-blade. Invaluable tool to join one piece of conduit to another.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD135. - Price: $29.95

Used and in great condition. Heavy Duty Sheet Metal Crimper / Lapping Crimper, handtool. Critical if you fabricate sheet metal enclosures or plastic enclosures and you must lap the edges for professional appearance and/or improved attachments (e.g. riveting, screwing, cementing, soldering, brazing, welding) of one edge to another. And having a flat surface for two adjoining pieces of sheet metal or plastic without a gap at the hinged side to install hinges requires using this device to indent one or both surfaces so when joined together there is both no significant gap or surface uneveness where professional appearance and precision are important. Simple and fast to use. You just simply securely insert the sheet metal or plastic edge into the crimper opening, and then use a hammer to force the crimp. For thicker sheet metals and plastic, do an opposite crimp on the adjoining piece. Great for field use so you don't have to bring a big heavy crimping tool or shaping tool with you to get the job done.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD135. - Price: $79.95. S/H: $8.90

New old stock (NOS). This is some kind of 3-piece steel specialized clamp used to clamp onto perpendicular parts or edges. We do not know what its original application is (do you?), and it is not stamped with its maker ID, or model or part number. Each of the two edge blocks (each has 3 screws) may be adjusted up or down by loosening a locking screw on the bottom left edge (left image) or top right edge (screws not shown), so the edge blocks can be adjusted up or down to fit even if seriously misaligned and/or different thickness parts. These edge blocks can also be removed. One edge block has a "V" groove machined along its inside middle, like many vises do, for gripping round parts and stock. This clamp or vise is very useful if, for example, you need to join two pieces of metal, wood or plastic at right angles to each other (even when they differ in thicknesses and/or alignment) to screw, cement, solder, braze or weld together. And to use one edge block to secure onto the edge of a table or bench top and the other edge block to hold your work. The 3 holes and two top screws can also be used for other clamping, vise, holding, positioning, mounting or other purposes. And the edge blocks can be replaced by other structures which fit into their slots. And any of these pieces can be modified to serve other purposes or expand its uses.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD134. - Price: $39.95

Used and in great condition. Rare, vintage IBM Pliers, IBM Smooth Jaw Pliers. Similar to B5113 pliers but these are authentic and rare IBM pliers. We have no idea what these were originally used for, but probably lineman's pliers. The round sides are great for pulling wires, strings or threads together (or apart). Usually, pliers with smooth jaws are used in jewelry fabrication and jewelry repair, but the "IBM" indicates a computer, electronic or electrical use. Great collectible and conversational piece.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD134. - Price: $39.95

PRECISION PARALLEL-JAW PLIERS, MODEL E9E
6.25" LONG, SMOOTH JAWS, 1/2"-WIDE JAWS, 3M

Used and in great condition. Precision parallel-jaw pliers, Model E9E, smooth 1/2"-wide jaws, 6.25" long. Made by 3M. Great for a many applications, ranging from jewelry, auto mechanics, general shop, home repairs, electrical work, musical instruments, scientific laboratory, crafts, modeling, etc. Because these special parallel-jaw pliers have smoothe jaws, these smooth-jaw pliers are very popular for jewelry repairs, and other work where delicate gripping and marr-free gripping are required. Jaws are stepped up in the back than the front part, which makes it better for holding, pressing or crushing small items. Has holes at the end of handle for a cord, string or wire (leather cord shown) to suit your needs. This cord is normally wrapped around the hand, and is also used for hanging pliers from a hook.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD108. - Price: $29.95

Used and in very good condition. Surface discoloration is minimal. Rare, Unusual Double-Headed Pliers, 2-headed Alligator Pliers. We have no idea what these were made for (do you?). Has no make or model embossed on it. Great for gripping and pulling fabrics, carpeting, upholstery, other soft materials. Great collectible and conversational piece.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD134. - Price: $199.95

STRYKER ORTHOPEDIC CAST SPLITTING BREAKER TOOL
GREAT EXPANSION TOOL / SEPARATOR TOOL / SPREADER TOOL
FOR CLAMSHELL & OTHER TIGHT PRESS-FITTED
ELECTRONIC, COMPUTER, MONITOR, TV CASES & ENCLOSURES

Used and in great condition, chrome-plated. Stryker Orthopedic Cast Splitter Tool is excellent expansion tool, separator tool and spreader tool also very useful for opening tight clamshell enclosures. This is a modified expensive cast-breaker tool with tremendous leverage, typically used by orthopedists and other medical doctors for breaking open orthopedic casts. However, when the ends are carefully honed down, as in this one, to make them sharper, this tool is the best tool possible for opening those frustratingly tightly-closed, press-fitted clamshell-type cases, enclosures and boxes commonly used for electronic equipment, computer, monitor and TV equipment with minimal damage to your equipment, your fingernails and knuckles, and your blood pressure. No more screwdrivers or scraper tools! No more slips and gouges in the case. Stryker cast breaker tool also be used for other expansion and separation functions, for examples, for breaking glue bonds, and for separating objects, structures and molds held together by stiction, vacuum tight, press-fitted, rusty, and melted and fused together. We also use this type of a cast expander tool for a wide variety of other uses, for example, recently we replaced the press-fitted wheels on the bottom of our chairs; the expander tool was used to easily and cleanly pop off the old wheels while not dislodging their plastic inserts - a usually difficult job to do with a pry bar or a screwdriver and hammer. Yet another case where a medical or dental tool has great general mechanical uses as well! 9" long, nose 1-1/8" wide, separates up to 1".

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD121. - Price: $69.95. S/H: $9.90

ORTHOPEDIC CAST SPLITTING SEPARATOR TOOL
INCREDIBLE EXPANSION TOOL / SPREADER TOOL
TOOL EASILY OPENS TIGHTEST CLAMSHELL ENCLOSURES

Used and in great condition. Stainless steel orthopedic cast breaking Tool is an incredible ultra-high leverage expansion tool, separator tool and spreader tool which easily opens even the tightest clamshell enclosures. While originally designed for medical doctors to break open orthopedic casts, this tool has incredible versatility for opening all kinds of difficult enclosures, cases, boxes, structures and molds, and separating other items stuck tightly together. Many computers, televisions, computer monitors, printers, radios, other computer peripherals and electronic equipment have clamshell enclosures that are often difficult - if not nearly impossible - to open without a tool like this. Try opening one with a screwdriver or chisel and you will likely slip and mar the case - plus you won't have the torque leverage to be effective. Cast splitter can even be used to open up real clams, large nuts, and for separating objects previously stuck together and, in some cases, cemented, wetted or rusted together. Great for paleontologists for breaking open fossils in casts, and for geologists for separating composite rocks. Cast breaker tool also be used for other expansion and separation functions, for examples, for breaking glue bonds, and for separating objects, structures and molds held together by stiction, vacuum tight, press-fitted, rusty, and melted and fused together. Very strong, very high quality. Should last you forever. Comes with a thick cushioned rubber-covered handle which permits you to comfortably use this valuable expansion tool and much improving its grip, especially important if you use it a lot for especially difficult jobs. The cushioned handle also insulates the tool electrically and thermally. We have several cast breaking tools in my shops and get lots of uses out of them. Made in Germany.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD107. - Price: $74.95. S/H: $11.90.

Used and very good condition. Versatile Peanut Dispenser Tool, aluminum, one-hand operation. If you do much shipping then you use much packing peanuts. What you do is fill up a large cloth bag with packing peanuts with a hook at its bottom. You then rubber band or clamp this tool to the mouth of the filled bag, invert the bag and then hang bag from a sturdy wall hook, pipe or beam. Then, whenever you need to add shipping peanuts to a shipping box, you simply place the open box under the mouth of this packing peanut dispenser tool, squeeze the handle to quickly and efficiently dispense the amount of packing peanuts you need. No longer do you need to dip your hands or some tool into the packing peanuts, which many consider to be unsafe. No longer do you have to frustratingly contend with packing peanuts sticking to your hands or clothes because of their static electricity or falling onto the floor.

While originally designed to dispense packing peanuts, this very versatile tool can also be used to hold, carry, measure, sort and/or quickly dispense just about any other group of small solid objects, such a real peanuts, nuts, grains, seeds, small fruit, popcorn, granular powders, screws, nuts, bolts, nails, other small hardware, electronic parts, crafts parts, gems, stones, fertilizer - you name it! You can fill it by using itself as a scooper, or using your hands, small shovel or another scooper to fill it. Not recommended for liquids or fine powders (as liquids will leak from it), however, it will also work find to help strain water from other small objects or granular material.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD145. - Price: $99.95, S/H: $11.90.

New old stock (NOS), new in bubble pack as shown. Sheet Metal Nibbler, Nibbling Tool, GC Tool. Works great on thin plastic and wood also.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD132. - Price: $12.95

VACUUM GAUGE / VACUUM METER / PSI GAUGE / PSI METER
w/ STOP COCK LAB VALVE / LABORATORY VALVE / BALL VALVE ASSY.

Used and in very good condition. Vacuum Gauge / Vacuum Meter / PSI Meter / PSI Gause with Stop Cock Lab Valve / Laboratory Valve / Ball Valve. All you have to do is plug in your vacuum line at the plumbing "T" fitting and you are good to go. Stop cock valve is good for vacuums, air and gases.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD132. - Price: $39.95. S/H: $9.90

Used, works great and very clean. This rare, unusual perforated drum roller is shaped like a paint roller, but it is perforated to uniformly dispense just about anything that is liquid. Can also be used to impart a textured surface on soft and malleable materials. Can also be used to securely hold something while it is being rinsed, washed, drained or treated with a liquid. We don't know what its original use is, we have not used it for anything, and it appears to be unused. Easily disassembled for cleaning.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD128. - Price: $49.95

Used and in great condition. Warner Tool Drywall Edge Cutter / Wallboard Edge Cutter, No. 174W. Great drywall edge cutter tool for quickly and accurately scoring and cutting drywall strips by simultaneously scoring or cutting both sides of drywall. Easily adjusted for a large range of scoring depths and wallboard thicknesses (cutting wheels can be adjusted in and out). This versatile drywall tool can also be used to score wood and plastic. Cutting wheels are easily replaced and removable for sharpening if you need to, and can be replaced with different types and sizes of wheels, discs and markers. Works great and easy to adjust both the depth and width of your drywall cuts. 7.5" x 1.6" x 6.8", 1.3 pounds. Plastic-coated handle for better and more comfortable grip and improved handle cleanup.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD128. - Price: $19.95

Like new but used and in very good condition. Unusual Vise-Grip Tubular Pliers, Customized Vise-Grip Pliers. Heavy-duty, 7-1/2" long, labeled 7R. These high-quality Vise-Grips have four factory modifications, three welded-on: (1) Upper round jaw, (2) Lower round jaw, (3) Special underneath front grip extension, and (4) Drilled-through 1/4" diameter hole. The two round jaws are 1/8"-thick, 1" long hard brass, with an oval opening (when Vise-Grips are closed) of about 3/4"-wide and 1/2"-high. Ideally designed to clamp onto round pipe, tubing, conduit, hose, cable, wire bundles, rod and other round stock and other objects which are 1/2"-3/4" in outer diameter, but will also securely clamp onto flat surfaces, oval objects, odd-shaped objects and irregular objects and other objects as well. One can add onto and/or modify the jaws for many other possible uses as well. The added front grip extension is also an excellent modification because it much increases your ability to hold onto the Vise-Grip pliers to pull, lift, carry or drag heavy or difficult objects, for turning the pliers under heavy loads, or when your hands have oil or water on them to minimize slipping (all Vise-Grip pliers should have this very useful feature). The 1/4" drilled-through hole is also very useful as you can use it to hang up the Vise-Grips on peg board or nail, and also to hard-join two or more of these Vise-Grips together using threaded rod, or soft-join them using rope, string or springs (e.g. for stretching jobs) (another very useful feature that all Vise-Grip pliers should have). For example, you can use two or more Vise-Grips bolted together at optimum distances to suspend a window, gate or other object for mechanical work or spray painting. We have 8 of these nearly identical Vise-Grips to sell, which means both that you can buy more than one from us and the one you get may not be the one in the images.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD137. - Price: $29.95. S/H: $9.90.

USEFUL, VERSATILE 9" ALL-PURPOSE COMBO TOOL /
MULTI-TOOL / WORK SITE TOOL / LANDLORD TOOL w/
LONGNOSE VISE-GRIPPING PLIERS JAWS /
LOCKING JAWS PLIERS, CLAW HAMMER HEAD, CUTTERS
BOLT HOLDER, ROUND & SQUARE STOCK GRIPPERS
WIRE GRIPPERS / WIRE-PULLING HOOK -
9" FENCING PLIERS / FENCE PLIERS / FARRIER PLIERS
SURVIVAL TOOL / TRAVEL TOOL / CAMPING TOOL

New old stock (NOS), sealed in original bubble package. Unusual, versatile and ultra-useful vanadium steel 9" long Multi-Tool / Combination Pliers/Hammer / All-Purpose Combo Pliers / Vise-Gripping Pliers / Locking Grip Pliers, with built-in Claw Hammer, Cutters, Bolt Holder, Wire Grippers and Wire Pulling Hook, Round Stock Grippers (both smooth jaws and serrated jaws), Square Stock Gripper / Nut Gripper. Rugged, heavy-duty, industrial-grade Vise-Gripping Locking Jaw Pliers. Drop-forged chrome vanadium steel jaws. While sold as fencing pliers and very functional as fence pliers (fence farrier pliers), these locking pliers (locking jaw pliers) have endless other great shop, home, business, field, travel, work site, survival and emergency uses. Used to tighten, loosen, clamp, twist, turn, hammer, pull nails, separate boards, cut wire and cable, and more. Longnose pliers tips for hard-to-reach places and small grip surfaces. Pliers stay adjusted for repetitive uses. Wire-pulling hook is great for building and repairing fences, for farrier work. This all-purpose tool is even useful for automotive, general mechanical, blacksmith and forge work.
This versatile multi-tool is great for the handyman and landlord. Great for the survivalist, and those forced into sudden survival modes and emergency situations because of earthquakes, hurricanes, tornadoes, tsunamis, flooding, and manmade disasters, including serious accidents, acts of terrorism and crimes. Great for the person who needs tools but has only limited space and/or limited weight for tools. These lock jaw pliers are great for the person who needs to do the job fast, often in harsh and/or dark conditions, must do the job both right and fast, and doesn't have time or visibility to dig through a tool box to find several tools. And this multi-tool is a great back-up tool in case your usual hammer or pliers fail, you need an extra set, and/or where saving weight and space are important such as hiking, camping, hunting, fishing, spelunking, mountain climbing, and trips in general. Ideal survival tool and emergency tool. Even great for self-defense - to hit or hook a knife, gun, etc. from an attacker's hands, and as very good grappling hook if required.
The simple truth is YOU MUST HAVE THIS MULTI-TOOL LOCKING PLIERS in your travel tools, camping tools, shop tools, household tools, car tools, construction site tools (worksite tools), travel tools, and emergency, outdoors and survival gear.

NOTE: DISCONTINUED ITEM! We were told by our supplier of this incredible 9" Multi-Tool is NO LONGER BEING MADE! We now have only a limited supply left of this very useful and versatile pliers/hammer/cutters combo tool. When our supply is gone, there will be no more. Please buy it today!

LIMITED QUANTITY. We have only a few of these popular multi- pliers-hammer tools left.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD126. - Price: $21.95, $9.90. S/H.

CRAFTSMAN ANGLE VISE CLAMP #93279 (9-3279)
FRAMING CLAMP / FRAME CLAMP / MITER CLAMP / MITER VISE

Used and in very good condition. High quality Craftsman Angle Vise Clamp, #93279 (9-3279), Framing Clamp, Frame Clamp, Miter Clamp, Miter Vise. While image shows the clamping elements in a vertical position (for a specialized use), they are easily converted to the standard horizontal position typically used in mitering.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD126. - Price: $19.95, $8.90. S/H

Used. Good mechanical condition with some surface rust and discoloration which do not interfere with function, and needs to be cleaned. Big Toledo No. 04 Pipe Threader. 24-1/2" long.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD126. - Price: $29.95, $6.90 Handling, 9 lbs ship weight

Used. Great mechanical condition with some surface rust and discoloration which do not interfere with function. 22-inch Plumbers Pipe Wrench.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD126. - Price: $8.95, $6.90 Handling, 9 lbs ship weight

10-INCH SCREW-TYPE SHOP CLAMP, C-CLAMP
CINCINNATI TOOL CO., STANDARD CLAMP, No. 540-10

Used. Great mechanical condition with some surface rust and discoloration which do not interfere with function. 10-Inch Standard Clamp, No. 540-10, by Cincinnati Tool Co., Screw-Type C-Clamp. Very useful, and great tool collectible.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD126. - Price: $39.95, $6.90 Handling, 9 lbs ship weight

10-INCH SCREW-TYPE SHOP CLAMP, C-CLAMP
CINCINNATI TOOL CO., STANDARD CLAMP, No. 640-10

Used. Great mechanical condition with some surface rust and discoloration which do not interfere with function. 10-Inch Standard Clamp, No. 640-10, by Cincinnati Tool Co., Screw-Type C-Clamp. Very useful, and great tool collectible.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD126. - Price: $39.95, $6.90 Handling, 9 lbs ship weight

CHOP SAW CONVERSION KIT / CUT-OFF SAW CONVERSION KIT
SAW BENCH, SAW STAND, SAW JIG

New old stock (NOS). Versatile Saw Conversion Kit: Chop Saw Stand / Cut-Off Saw Stand (Chop Saw Bench / Cut-Off Saw Bench, Chop Saw Jig / Cut-Off Saw Jig). Base is 9.5" x 9.5". Has several bolts attached to it that makes it a versatile saw mount for many different kinds of saws.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD131. - Price: $19.95, s/h: $10.90.

ROUTER TABLE TOP / POWER TOOL PLATFORM
(also for DRILLS, GRINDERS, MILLING MACHINES,
CUTTERS, SAWS, SHAPERS, CLAMPS, VISES),
15-3/4" x 15-3/4" x 5/16"

With "X" cutout in middle. Very useful in the shop and laboratory as a permanent or temporary work table for numerous and varied uses, including those listed above. Can be used for many other general table top uses. Strong, sturdy and durable. Each "X" slot is 3-3/4" long and 5/8" wide. Used but in good condition (a few surface scratches).

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD100. - Price: $39.95. S/H: $13.90

In great condition, may be new or used. These are sturdy heavy duty router parts for unknown router, and includes router guide, new router motor brush (carbon motor brush with spring), large router steel fence (9-3/16" wide), angle guide, and standoff. Guide rods are 3/16" diameter, guide spacing is 4.5" apart, and guide assembly is 9" long. We got these at an estate sale - a previous buyer bought the router days earlier but failed to pick up these parts, so owner sold them to us.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD111. - Price: $24.95

Workmate 7" Quick Vise, No. 79-081, Type 1. Used, and works great. Sturdy and very well designed and built. The Workmate Quick Vise is one of the best designed vises ever! Some of its great features: (1) Quick release allows you to quickly open and close the vise - saves much time and effort. (2) Strong base with four 1/4" mounting holes. (3) Base is quickly rotated through 360 degrees azimuth (8 positions) by loosening the knurled knobs, rotating, and securely tightening them back down (see base in top image). (4) Non-mar padded inserts in vise jaws permit secure clamping of both flat work and V-grooved for tubing and pipe mounted either horizontally or vertically. (5) Two adjustable vise screws - great for securely clamping uneven work, such as wedges. (6) Top work surface when you need to hammer something or bend sheet metal.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD107. - Price: $99.95. S/H: $7.90, 8 lbs

New in the package, quantities below. Very high quality 8" Masterall clamps. All new in their bubble packaging (2 are shown unpacked for demo purposes only; since two 8" Masterall Clamps come per package). Made in Canada. While most plastic ratcheting clamps have plastic ratchets, these are far superior because they have metal ratcheting so you can clamp harder and the clamps last a longer time. How many times have you reached for a one-pressure clamp only to find that the one-pressure clamp did not exert enough pressure or exerted too much pressure? These very versatile adjustable clamps allow you to apply a wide range of clamping pressures through a wide range of jaw openings to suit your various real time clamp and vise needs. Release easily operates for removing clamps. These clamps also have relatively broad swivel heads on them that better allows you to clamp angular and odd-shaped work. Sturdy plastic construction of clamp body electrically insulates and thermally insulates the user from object the clamp is used on, makes the tool more comfortable to handle and a lighter weight, has a less of a chance of scratching or indenting your work, and won't corrode.

I bought a ton of these and use the ones we are keeping almost daily in my shop, laboratory, offices, home, yard, truck and in the field, and am selling here the ones in excess of my needs. They are also very useful tools for the factory, farm, ranch, RV, campsite, hunting and fishing, and for photographic processing, spray painting, and for hanging clothes and other items to dry.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.

BUYER: Order by Title (below image) - Email Us Your Order. - List History:
(4) MASTERALL CLAMPS: LD100. - Price: $9.95
(8) MASTERALL CLAMPS: LD100. - Price: $17.95. S/H: $9.90
(12) MASTERALL CLAMPS: LD100. - Price: $28.95. S/H: $11.90

BALL ROLLER STRIPS: MOVING/POSITIONING /
MANIPULATING HEAVY LUMBER, SHEETROCK,
SHEET METAL, BIG PIPE, OTHER SHOP STOCK,
OTHER MATERIALS, STOCK, HEAVY CONTAINERS

Sale is for the pair of them. Heavy duty, industrial grade roller strips. Used and in great condition. Has 11 chrome steel ballbearings, each 3/4" dia., in heavy steel frames. Can be mounted on top of stands, table, bench, pick-up truck bed, van, concrete floor, etc. Allows the movement of heavy materials, containers and parts with much less efforts and usually much less chance of injury or damage (e.g. breaking, denting, tearing, splintering, scratching) than if you have to move the same heavy or rough surface material on a solid or even ribbed surface. If you have ever spent a day working on a construction site, warehouse or factory floor constantly moving and positioning heavy items and rough items with a lot of friction, then you know how much effort and wasted time it takes, how sore your body is at the end of the day, and how much materials were damaged in the process. Especially if you are not getting any younger. And how costly in money and time it can be if you get injured in the process of trying to move materials too heavy or too bound by surface friction for you to move both easily and smoothly. And how costly it can be to you if your projects are going too slowly and you are not meeting your work deadlines.

These ball bearing roller strips can also be mounted to the bottom of a dolly, cart, hand truck or container for movement over smooth hard floors, basically as a set of wheel assemblies. Each roller rail is 17" long (excluding end flanges) x 2" x 2".

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD061. - Price: $49.95. S/H: $8, 8 lbs

New in original sealed bags. This sale is for 2 Superstrut cushioned clamps derived from: (1) 1-5/8" (3 in stock), (2) 1-3/8" (1 in stock), and (3) 7/8" (3 in stock). These are all We have left. Just tell us which ones you need from this list.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD099. - Price: $7.95

New in original sealed bags. 3/8" - 1-3/8" O.D. We are also selling dozens of new different makes and models of valves and fittings (teflon, stainless steel, brass) - see my webpages.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD099. - Price: $12.95

Used and works great. While not new, the dies are still in good condition. 23-1/2" long. Sizes are: 5/8" - 10 TPI. 1/2" - 12 TPI. 7/16" - 14 TPI. 3/8" - 16 TPI. Aside from being a great collectible, this Butterfield pipe threader is really nice because you can even do oddsized pipe diameters smaller and larger than the rated diameters for any of its thread TPI, and because you can thread pipes of varying diameters fast and efficiently because you don't have the change the pipe dies every minute. We have mainly used it over the years to thread PVC pipe pieces that we use to house electronic probe electronic circuits so that we could put screw-on end caps on them.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD061, LS092-R10. - Price: $69.95. S/H: $6, 6 lbs

(3) ANTIQUE, RARE, HIGHLY COLLECTIBLE
BLACKSMITH SWAGES / WHEELWRIGHT SWAGES /
BLACKSMITH HAMMERS / WHEELRIGHT HAMMERS

Terrific find at an estate sale! Heir of owner of these unbelievable hammers/swages told us that his great grandfather, a blacksmith and wheelwright, used these hammers/swages to prepare and repair the wagons of Mormon Pilgrims on their way to Utah shortly after the Civil War. Since we do not know this person or his family, we have no way of knowing and cannot guarantee that his story is true - but if true, these hammers/swages have an incredible history to them!

Longest hammer/swage is almost 23" long (other two are about 15.5" and 15"). We can find no markings on the heads. But two hammers/swages have markings on their handles (the heir did not know if the handles or heads had ever been replaced). One handle has embossed on it, "PROP. OF BETH STEEL" ("BETH STEEL" is best we know (We are not an antique tool expert) an abbreviation for Bethlehem Steel, which built the Golden Gate Bridge), top handle section in 3rd image. Another handle (the long one) has embossed on it, "Prop. of Beth Steel Corp." on one side and "Buckeye", "HARTWELL GENUINE HICKORY", and "HARTWELL BROTHERS MEMPHIS, TENNESSEE" in green lettering on the other side, bottom two handle sections in 3rd image (apparent differences in handle widths and colorations in image are due to lighting and zoom effects, actual color of all handles is a dark brown). Both the hammer/swage heads and handles have seen much vigorous use, but are still very usable if you still wish to use these hammers/swages (much better in a collector's case).

Take a look at the incredible heads on these hammers/swages! On all of your years on this planet, have you seen heads exactly like these! we was told by the heir that the heads are concave like this to accommodate the shape of wagon wheel hubs, and to help shape wagon wheel axles.

Clearly, this is a very special collection of hammers/swages. Do NOT let them get away from you.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD049, LS092-R50. - Price: $99.95. S/H: $9, 9 lbs

RARE, ANTIQUE POT BELLY STOVE TOOL:
HOT LID LIFTER, HOT LID HOLDER, HOT LID REMOVER

In the decades we have religiously collected antique, weird and rare tools, this is the first one of these we 've run into. A fantastic collectible! A gotta have tool for sure! Functions perfectly well not only to lift, remove and hold hot lids that have the double-screw lift feature, but also as a bolt spacer for placing the type of bolts and rivets commonly used, for example, for shelving and heavy picture-hanging.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD100. - Price: $49.95

Roundover router bit with carbide tip, 28,000 RPM. Used on 2 boards (70-inches total), and in great condition.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD111. - Price: $14.95

Sheet metal brake is used and in like-new condition. Used and works great. Heavy duty, 18" industrial-grade manual metal bending brake for bending sheet metal steel, 16 gauge steel maximum thickness, including galvanized steel sheet. Can be bolted to work surfaces. Shown with screw-in handles scotch-taped to top of brake for shipping purposes. Use safety gloves and safety goggles.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD061. - Price: $69.95. S/H: $10, 10 lbs

Heavy-duty, industrial grade steel concrete trowel / concrete edger, 10" x 6". Used and in great condition. This is the type that is connected to a long handle. It is bright, shiny steel but appears dull in image (it is very hard to photo highly-reflective surfaces).

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD106. - Price: $29.95. S/H: $9.90

Empire Level 6710 100' Geared Open Reel Nylon-Clad Steel Tape Measure. Used and in great condition. High impact resistant body. Oversize handle with rubber hand grip. Rewind crank folds flat. Blade hook large enough to fit over rebar. Heavy duty construction. Double rivet case design.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD106. - Price: $19.95. S/H: $9.90

RARE, VINTAGE POLICE ROLATAPE
MODEL 200 CSI TAPE MEASURING TOOL
w/ LEATHER CASE + DOCUMENTs

In excellent condition! This stunning and exciting find is a rare vintage crime scene investigation (CSI) rolling tape measure equipment primarily used to investigate serious traffic accidents and perpetrator trails. Very high quality construction and materials. Body is made of metal and is about 7.5"diameter. Rolatape label states that it is a Rolatape Model 200 (Santa Monica, Calif.). Has an accordion-type folding arm that extends to about 3 feet (image shows it next to an 18" ruler). The handle folds up neatly and stores into the provided leather case, permitting the crime scene investigator to easily carry it in his vehicle. Even includes the rare documentation on it! This cost $34.75 when bought new, circa 1950s. We bought it from a retired police officer.

If you are a serious collector of police memorabilia or you are a professional or amateur crime scene investigator, you MUST get this device!

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD049, LS092-R25. - Price: $119. S/H: $15, 5 lbs

Used and they work great. This sale is for one carpet stretcher / carpet puller / carpet remover. While they function virtually identically to pull rugs/carpet, stretch rugs/carpet and remove rugs/carpet, their designs are slightly different. Mainly, one has a flat handle and the other has a rounded handle. These versatile tools can also be used to pull, stretch, position and/or remove other materials, such as other flooring, leather, upholstery, plastic sheets, bedding, plywood, etc. Can also be used as a comfortable way to carry or hang some objects. Definitely saves your hands, wrists, fingers and finger nails much wear and tear and grief, and you do your jobs much faster and with better results.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD121. - Price: $24.95. S/H: $8.90

Used once, works great. Varnished hardwood upholstery tool / carpet tool / webbing stretcher toolo. A hardwood stretcher with durable corrugated rubber grip on one end and a row of 6 pointed steel teeth on the other. This upholstery tool / carpet tool / webbing stretcher tool is a must especially when you are applying jute webbing to cover furniture. The sharp points poke through the webbing and pulling down you create tension to staple the webbing.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD107. - Price: $24.95

Used and works great. Heavy-duty, industrial grade steel 4-post ThermOweld clamp device. Handle clamp for PK 4, 7, 17, 22, 24, molds with nominal 3-1/8" square.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD107. - Price: $44.95. S/H: $11.90

Used and in great condition. Acetylene Torch Nozzles / Oxy-Weld Torch Nozzles, with replaceable tips. High-quality, 7.5" long. We bought these from an out-of-business shop.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD121. - Price: $39.95

New. We got these at an estate sale. We are not a welder, and don't know what their amps or temperature ranges are. Welders have told us that this is a fairly standard welding rod, and that most arc welding equipment has a setting for it.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD049. - Price: $6.95

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD100 $24.96. S/H: $9.90.

CURRENTLY OUT - EXPECT MORE IN SOON. New. Swagelok valve tools. We have been told that these tools are used to hold a Tee Union to tighten up the Swagelok fittings. It's special arms can reach around each port making it much easier to use than a plain wrench. We know of no other tool that duplicates or even approximates their function. Swagelok valve tools MS-TW-6 (3/8", 5/16", 8mm) and MS-TW-4 (1/4", 6mm).

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD061, LS092-R10, MM092. $79.95. S/H: $9.90

New. Swagelok valve tools. We have been told that these tools are used to hold a Tee Union to tighten up the Swagelok fittings. It's special arms can reach around each port making it much easier to use than a plain wrench. We know of no other tool that duplicates or even approximates their function. Swagelok valve tool, MS-TW-8, 1/2" and 12mm.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD107. - Price: $49.95. S/H: $9.90

SOLD. WE EXPECT MORE IN SOON. Used and in good condition. The ULTRA CLAMP Model 781150 has three point precision alignment and maximum versatility. This alignment results in accurate fit of 2" - 6" pipe, rod, pole, and other stock that will fit of steel, copper, brass, aluminum, plastic and wood. Great for doing all kinds of vise jobs and clamp jobs, especially the difficult job of aligning pipe and other objects. Not limited to standard sizes or stock that is exactly round, or even to stock that is long (e.g. will also hold small figures). Simple and fast to operate for all shop, field, construction site and craft uses - a must have! Industrial grade - very heavy duty, rugged, durable clamp / vise. My price is a real bargain for what these clamps cost new. Has some cosmetic scuffing, scratches, dings and discolorations but works great.

UNIQUE ITEM. This is the only one.

BUYER: Order by Title (below image) - Email Us Your Order. - List History: LD098. - Price: $144.95. S/H: $12, 12 lbs

ABQ TECHZONICS (Albuquerque, NM) SELLS, BUYS & TRADES: ELECTRONIC COMPONENTS, ELECTRONIC PARTS, ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Thermistors, Crystals, Oscillators, Sensors, Transducers, Optoelectronics, Prototyping, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, RF, Microwave, Electronic Modules, Power Adapters, Power Supplies, other Electronic Parts / Electronic Components / Electronic Subassemblies / Electronic Assemblies. EQUIPMENT, DEVICES: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Mechanics Tools, Precision Tools, Tool Chests. MORE TECH STUFF: Commercial/Industrial/Scientific/Laboratory Valves, Fittings, Hardware Parts, Mechanical Parts, Supplies, Special Materials, Security, Survival, Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Books, Manuals, Software, Collectibles.

SOURCES OF ITEMS ABQ TECHZONICS SELLS: Surplus, online auctions, hamfests, private sales, business moving sales, overstocks, job lots, wholesale lots, estate sales, garage sales, thrift shops, charity auctions, flea markets, hardware trades, abandoned storage, lost & found property sales, discontinued items, obsolete items, warehouse inventory updates, excess inventories, liquidations, business closures and out-of-business sales, foreclosure sales, bankruptcies, government auctions / government sales, new salvage sales, and other sources for integrated circuits (ICs), electronic parts / electronic components, hardware, special materials, etc., Albuquerque, NM area preferred but will buy from anywhere. ABQ Techzonics is both a wholesale sellers/wholesale traders/wholesale buyers and retail sellers/retail traders/retail buyers, largely depending on quantity.

       IMAGE SPONSORED BY:
Consumertronics
Lone Star Consulting, Inc.
ABQ Techzonics
       REPRINT POW-MIA IMAGE=>
             ON YOUR WEBSITE

NOTE: By policy, we never recommend for or against, approve or disapprove, sponsor, endorse, support, guarantee, or take any responsibility for any of the content of any non-Consumertronics webpage, website, advertisement, publication or other statement EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. And by policy, we never recommend for or against, approve or disapprove, sponsor, endorse, support, guarantee, or assume any liability or any other responsibility for any non-Consumertronics company, product or service EVEN IF WE HAVE PROVIDED A HOTLINK TO IT and EVEN IF WE HAVE DISCUSSED IT OR INFORMED YOU ABOUT IT on a webpage, or by phone, email, mail or fax, or by any other means of communications. For more information on our policies, please refer to our policies.htm webpage.
Test Source Links only (no visitor use): Source-1, Source-2, Source-3, Source-4, Source-5, Source-6, Source-7, Source-10, Source-11

by www.consumertronics.net Order Form (MAIL/EMAIL) Or write down order on paper, add it up + S/H, Mail/Email (PDF or TXT attach) to us. Check, Money Order, PayPal (wizguru@consumertronics.net), Western Union, Moneygram, Trade => 2012 CATALOG Webpages now on CDROM or Disk (only $12)	ABQ Techzonics Albuquerque, NM Sitemap	Contact Us: wizguru ...tell your friends! policies.htm
USA site - No cookies - No spyware - No adware - No trojans - No viruses - No worms - No spam - No pop-ups